SKU: 94756305783
tricolour indoor plant

tricolour indoor plant Hoya carnosa 'Tricolor'

Sale price$22.72 Regular price$25.24
Save 10%

Pay in installments of $6.31 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 1 - Aug 6

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

tricolour indoor plant Hoya carnosa 'Tricolor'Hoya carnosa 'Tricolor' Hoya carnosa 'Tricolor' is a variegated wax plant with fleshy mid green leaves splashed with cream and often flushed pink while young. It grows as a stem rooting climber or trailing vine, with flexible stems that can hang, loop around a support or extend as runners before filling in with leaves. The plants colour pattern changes naturally as leaves mature. Young pink flushed growth settles into firmer cream and green

Hoya carnosa 'Tricolor'

Hoya carnosa 'Tricolor' is a variegated wax plant with fleshy mid-green leaves splashed with cream and often flushed pink while young. It grows as a stem-rooting climber or trailing vine, with flexible stems that can hang, loop around a support or extend as runners before filling in with leaves.

The plant’s colour pattern changes naturally as leaves mature. Young pink-flushed growth settles into firmer cream and green variegation, while older stems can carry short peduncles that produce fragrant waxy flower clusters once the plant is mature and settled.

Cream-splashed Hoya carnosa traits

  • Growth habit: Stem-rooting Hoya vine that can trail or climb with light support.
  • Leaf colour: Mid-green fleshy leaves splashed with cream and pink tones on young growth.
  • Flowering: Mature plants can form tight, domed clusters of night-scented pale pink waxy flowers.
  • Long-term growth: Can become a long indoor vine over several years when light is bright and roots are healthy.
  • Container behaviour: Best grown in a breathable substrate and a drainage pot that does not stay wet for too long.

Tricolour foliage and stem-rooting growth

Hoya carnosa is a climbing epiphyte or lithophyte from subtropical habitats. It naturally grows with roots exposed to air pockets, brief moisture and loose organic material, so a chunky mix and careful watering are more important than a large pot or rich, heavy soil.

'Tricolor' is recognised in cultivation for cream-splashed leaves and pink-flushed young growth. The stems may grow ahead of the leaves at times, especially when the plant is searching for support. Older vines can flower from persistent spurs, and those spurs should remain on the plant after blooming.

The leaves contain both green and pale tissue. Green areas provide most of the chlorophyll, while cream and pink sections create the variegated pattern and can mark faster under heat, sun or rough handling.

Care for cream and pink variegated vines

  • Light: Keep in bright indirect light. This keeps stems firm and reduces scorch risk on pale tissue.
  • Watering: Water well, then allow roughly 60–80% of the mix to dry. The thick leaves handle a dry interval better than roots kept wet.
  • Substrate: Use bark, coarse fibre and mineral drainage. A mix with larger particles keeps oxygen around the root system.
  • Pot choice: Use a drainage pot matched to the root ball. Repot when roots and substrate condition justify it, not just because the stems are long.
  • Temperature: Keep active growth around 16–24°C. During cooler months, reduce watering and keep the pot away from cold windowsills.
  • Humidity: Moderate humidity reduces stuck or distorted new leaves. A humidifier can help if new leaves emerge distorted in very dry indoor air.
  • Feeding: Feed lightly while new growth is active. Strong feeding is unnecessary and can push soft growth.
  • Training: Attach stems loosely to a hoop or let them trail. Healthy bare runners can be left to leaf out later.
  • Pruning: Remove damaged growth or prune to shape, while keeping peduncles intact for future flowers.
  • Warm outdoor placement: Summer placement outdoors is possible in sheltered bright shade after gradual acclimation. Bring the plant indoors before nights fall below 16°C.
  • Mineral substrates: Semi-hydro or inert substrates can suit established cuttings when roots stay oxygenated and nutrients are supplied gently.

Diagnosing leaf colour, roots and flowering

  • Brown cream sections: Check for direct sun, heat through glass or cold contact. Pale areas mark faster than green tissue.
  • Yellow leaves with damp mix: Inspect root firmness and drainage. Let the mix dry further and move to a chunkier substrate if it has compacted.
  • Wrinkled leaves: Check both dryness and root function. Water uptake drops when the plant stays too dry for too long or after root damage.
  • Uneven colour between stems: Expect natural variation. Prune only if one stem begins to dominate the plant’s overall shape.
  • No blooms: Review light level, plant maturity and peduncle retention. Young plants often need more time before flowering.
  • Pests: Check nodes, undersides and new shoots for mealybugs, scale or mites. Treat early before pests spread along the vine.

How 'Tricolor' leaves change with maturity

Hoya carnosa 'Tricolor' does not produce identical leaves at every node. One vine can carry cream-heavy leaves, greener leaves and pink-flushed new growth at the same time. This variation is part of the plant’s normal development and gives mature vines a layered colour mix.

Pet safety and sticky sap

Wax plant is listed as non-toxic to cats and dogs. Keep it away from animals that chew leaves, because eating plant material can still cause stomach upset. Sticky sap can appear from cut stems, so wash hands after pruning.

Hoya carnosa and 'Tricolor' meaning

Hoya carnosa belongs to Apocynaceae. Hoya honours Thomas Hoy, gardener to the Duke of Northumberland, and carnosa means fleshy, referring to the thick leaves. 'Tricolor' refers to the green, cream and pink tones seen across the variegated foliage.

Hoya carnosa 'Tricolor' develops cream-splashed leaves and pink young growth on a long-lived wax-plant vine.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 94756305783

Discover Niche Categories That Outsell tricolour indoor plant

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
James P. Karl
Fort Morgan, US
★★★★★ 5
Denon avr ir remote port works great with sewell products
I bought a new entertainment center with glass doors and wasn't getting good signal range with the door closed. Plus i couldnt get a good of line site, since this cabinet was shorter than the orginal, and the location for my avr was further to the left than before and now my line of sight to the receiver was blocked from other parts of the room due to high couch back. I tried a couple different cheap $10 devices that used stick on transmitters/receiver buttons but they were clumsy and didn't provide me a total solution for my room layout. Works fantastic with a denon x1800 receiver (and many other models). It works directly with the denon's ir remote port in the back of the avr port. The solution is actually quite simple. Plug a stereo 3.5 mm male to male plug in the denon ir port in the back of the avr and and the other end to the orange emitter box(puck). The pics are about the size of an oreo double stuff cookie Tuck the orange box/puck away whereever and plug the power in. The box doesn't need to seen or be pointed towards anything. It's location is only limited by the length of your stereo cable and access to AC power Put the blue box puck anywhere in the room where you have general line of sight to it from where you will be using your remote, and plug power in. In my case, its sitting on top of one of my tower speakers. From there it clears the back of the couch and can see from the family room, eat-in kitchen area, and the kitchen beyond. Done. I didn't need or use any of the included emitter or transmitter cables, though if you dont have a denon, or other brand avr with an ir port to plug into , or also want to hide the blue puck ( in which case attach the included sensor cable), you'll need them. But for denon users with an ir port, you just use the two pucks and their usb power adapters. Simple.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
T
Verified Purchase
Tjaltz316
Fort Morgan, US
★★★★★ 1
Worked good then died at six months (Updated)
Worked good for a couple of months, then started to develop a lag between when you pressed a button on the remote, and when the TV would respond. If I moved the speaker blocking the TV’s IR receiver, and pointed the remote at it, it worked perfectly. Add the IR blaster back in and the delay returns. The delay kept getting longer and longer, sometimes 5 to 10 seconds. Then it just died. Would not pass any IR signals, even though the receiver and emitter both had power. Tried rebooting, changing communication channels to no avail. Out of Amazon return window. Manufacturer wants you do go through a troubleshooting process for warranty that is too complicated and time consuming. Customer Service Rep at Sewell send me a warranty replacement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2025
J
Verified Purchase
Jack & Ann Kenny
Bozeman, US
★★★★★ 5
Nice Product and Customer Service
I ordered this BlastIR Wireless Pro IR Repeater from Sewell to replace a wired version of an IR repeater from another company. We have moved our TV on to a wall location and are in the process of hiding all the wiring out of sight behind walls and/or in a cabinet. We still have some wires to go, but this product has enabled us to eliminate the IR wiring all together. It's a real improvement in both looks and performance over the cheaper, wired version we originally tried. The BlasterIR's Receiver is the component that faces the room and receives the IR signal from our remote controls. It's small enough to fit in the space between our sound bar and the bottom of the TV. It's range is great for our room size (about 22' long and 18' wide) and picks up the remotes signal from a side angle that's almost parallel to the TV itself. The receiver is powered through one of the USB ports integrated into the TV (although the device itself supports either a USB or regular plug-in option). I haven't used them yet but Sewell appears to have provided a few options to help with affixing the IR devices in their final positions including some adhesive pads and a magnetic pad option as well. I'm still playing around with the permanent placement of the IR Blaster Emitter. It sits inside a closed cabinet and faces the concealed cable box receiver, router and DVR components. It retransmits the various IR signals it receives from the IR receiver by blasting that signal to anything it faces. I just placed it in the cabinet about 5" away from the devices I wanted to control, plugged it in and it worked with no other set up. So far the BlastIR is working seamlessly and with much better function response time than the cheaper IR version we'd tried at first. The lag time between when a button is pressed on the remote control and the action taking place on the device I'm communicating with is minimal. The emitter itself is plugged into an outlet on a surge protector powering the other in-cabinet devices, although it too could be powered via the provided USB connection if desired. As a note, we did experience a shipping issue during our ordering process. The order it self was processed quickly and shipped in a timely manner. However, there was an issue with our actual receipt of the product and the USPS who reported it delivered to our mailbox when in fact it had not been. Regardless, we reached out to Sewell directly and they quickly resolved the issue for us with no problems and in a timely manner. I would recommend both this IR Blaster Pro product as well as Sewell as a trusted company itself.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2021
S
Verified Purchase
Scott C
Dallas, US
★★★★★ 3
Does NOT Transmit Through Walls
Quick and easy setup! Works great within the room. However, will not work effectively between walls (i.e. - AV closet to living room).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026
H
Verified Purchase
HSNYC
Battle Creek, US
★★★★★ 5
Works perfectly - great product
My MBR TV set-up incorporates a cable box set up in a closet about 50 feet from the TV (hung over a fireplace). When it was set up the A/V used a wired infra-red set up that was wired thru the walls, under the floor, into the closet. Unfortunately some mice nibbled on the wiring and it does not work. I have tried everything including the Next Generation extender (over the years bought 6 of them for different TV's) and most recently the Startech. The Next Generation have not been updated in years and over time completely lose their ability to operate. No customer service at all; emails go into a black hole. I had high hopes for the Startech. Easy to set up and worked out of the box. The problem is the lag time. I could live with it when watching live TV, but it was totally impossible when it came to playing back programs from the DVR (which is cloud based). I was losing hope until I tried the Sewell Blaster. Took me less then 5 minutes to set up and it worked instantly. Little or no lag to speak of and I couldn't be happier. NB. Speaking of Sewell, the absolutely BEST way to control your HDMI based TV is the Sewell Direct SW-30062 Dual Band InjectIR sold by Amazon for $55. This is truly plug 'n play and operates with absolutely no lag. Bought 2 of these to operate TV's in my apartment where I had to hide boxes in closets. Well made, great instructions (coordinated with the devices) and I just love this product. I bought mine direct from Sewell ) same price) because I couldn't find them on Amazon when I needed them, but they have a great return policy and I'm told great C/S. If you can't use these then go for the Blaster.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 30, 2018

recommand products