Pay in installments of $6.78 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 18 - Jul 23
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
uppababy cruz v2 vs nuna mixx next Nuna MIXX™ Next + PIPA™ Urbn Travel SystemA next level travel system where innovative safety and first class luxury features combine into a stylish dream team that raises the bar on living a seamless baby life on the go. The Nuna PIPA urbn reimagines the future of travel with baby. This one of a kind, ultra lightweight infant car seat weighs only 7 pounds* and installs using the advanced pipaFIX rigid latch. This groundbreaking baseless installation feature is integrated into the car seat,
A next-level travel system where innovative safety and first-class luxury features combine into a stylish dream team that raises the bar on living a seamless baby life on the go.
The Nuna PIPA urbn reimagines the future of travel with baby. This one-of-a-kind, ultra-lightweight infant car seat weighs only 7 pounds* and installs using the advanced pipaFIX™ rigid latch. This groundbreaking baseless installation feature is integrated into the car seat, allowing for super secure installs in seconds when moving from car to taxi, to rideshare and offering a new generation of journeys. It also features a one-handed, quick release from stroller and vehicle and Nuna’s iconic Sky drape™ for ultimate privacy - so you and baby can navigate life with modern-day ease.
Feel free to pack up and go anywhere with the Nuna MIXX next stroller. It delivers a smooth ride you can maneuver with one hand and a convenient variety of riding modes for different ages and stages. The five position recline feature can be adjusted with one hand and offers baby the ultimate in customized comfort options. When done strolling, it packs away with a compact fold no matter which way the seat is facing. It is designed to effortlessly connect with the PIPA urbn to make baby life on the go so much easier.
*Without canopy and insert
MIXX next
- Rear-wheel Free flex suspension™ and front-wheel progressive suspension technology
- Stands when folded
- A one-piece fuss-free, compact fold no matter which way the seat is facing
- All-season seat keeps baby comfy in winter and unsnaps to mesh in summer
- Removable two-piece seat insert grows with baby
- No-rethread harness for easy adjustments
- Tough, rubber foam-filled tires are ready for any terrain
- One-touch, rear-wheel braking system is strong and responsive
- Easy to flip the seat and switch to bassinet or travel system modes
- Quick release five-point harness for secure strolling
- True-flat recline for newborn comfort
- Five position recline easily adjusts with one hand
- Adjustable calf support with integrated footrest promises a comfortable ride
- Super convenient, automatic quick-click fold lock and trolley function when folded
- Height-adjustable pushbar
- Smart and stately dark matte frame with chrome black wheels
- Luxe leatherette accented pushbar and armbar
- UPF 50+ canopy is water repellent and extendable and features a flip out eyeshade, ventilation panel and window
- Two compartment basket including secret zipper pocket
- Cell phone pocket on seat back
- Removable armbar fits kids of all sizes
- Pairs perfectly with all Nuna PIPA™ series infant car seats
PIPA urbn
- Auto-reclining foot that aids in proper installations in vehicles
- European belt path for vehicle belt installations
- Aeroflex™ foam that is cleverly lightweight, resilient, and minimizes force transferred to baby by absorbing and diffusing energy
- Side Impact Protection for ultimate baby safe keeping
- Five-point harness keeps travels secure
- Sky drape™ pulls down smoothly and attaches quietly with magnets
- Full-coverage UPF 50+ canopy is extendable and features a flip-out eyeshade and XL peek-a-boo window
- From fabric to foam and beyond, each element is smartly sourced to be both flame resistant and contain no added fire-retardant chemicals
- Integrated magnetic buckle holders help keep straps out of the way when buckling baby in
- Head support includes a 2-layer soft surround to accommodate smaller babies
- Infant head support and body inserts feature environmentally friendly Merino wool and TENCEL™ *** branded lyocell fiber blend that is soft, naturally controls moisture, and is environmentally friendly
- Machine washable seat fabrics and inserts
- Luxe leatherette carry handle for stylish journeys
- FAA certified for aircraft use
- All installation types are baseless- no base needed
- Not compatible with PIPA™ series base or RELX™ base
- Set of included anchor guides make it easy to locate and install on the lower anchor bars in vehicle
- GREENGUARD Gold Certified: Products that have achieved GREENGUARD Gold Certification are scientifically proven to meet some of the world's most rigorous third-party chemical emissions standards, and certified to not contribute to indoor air pollution or chemical exposure
- *Refer to instructions for any final adjustments **Weight excludes canopy and infant insert ***TENCEL™ is a trademark of Lenzing AG
Specifications
- MIXX next
- Recommended use: Birth to 50 lbs
- Weight: 28.3 lbs (without arm bar or insert)
- Open: L 32.7 x W 23.6 x H 45.3 in
- Folded: L 27.5 x W 23.6 x 19 in
- PIPA urbn
- Recommended use: 4 to 22 lbs, and up to 29 in
- Weight: 7 lbs (without insert and canopy)
- Size: L 25 x W 17.5 x H 22 in
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 4
pretty good banana plugs
Size: 5 Pack, Pattern Name: Banana Plugs
i bought these over 6 months ago and i just installed them to the front left and right floor standing speakers - sony ssf-7000 i have them for over 10 years hooked up to a yamaha 7.1 AVR.
alot of people have had trouble installing this - one single banana plug comes in 3 parts - the bottom and top (the banana plug tip) can be unscrewed.
what i did was tightened the top first (top being the tip of the banana plug) then unscrew the bottom off completely - make sure you have like 3/4" - 1" (depending on your gauge of wire) of exposed speaker wire that is straight - then thread it through the hole at the bottom up - i then rolled the exposed 3/4 - 1" exposed copper wiring into a ball that is bigger than the hole of the banana plug bottom piece so the wire doesn't fall back through where it came from. then i screwed on the top and middle piece back with the bottom piece - tightening it a bit so i know there's good contact. also make sure the tip is screwed in all the way as well as a double check. what you don't want to do is have the copper wire touch the threaded part of the bottom piece - the wire will cut off from the screwing action.
i plugged it into my sony speakers and it wasn't a real snug fit - a bit too loose to feel secure - it didn't seem to go all the way in - but it fit fairly well in my receiver. my intention was to use these banana plugs with my 2 channel set up but i decided to go pre-constructed mediabridge 12 AWG speaker cable instead - those fit my 2 channel set up on my receiver and elacs really snug and secure.
i tested it and it works fine. i didn't hear any loss of signal or any extraneous noise. none of my (14 awg?) wiring fell through the bottom and it sounds good. so no complaints there.
i bought 5 pairs - but i find that it is an odd number to include a package - even numbered pairs would be better.
anyway they seem constructed well - easy enough to install and they do work.
thanks for reading
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 12, 2019
★★★★★ 5
High quality and robust
Size: 12 Pairs, Pattern Name: Banana Plugs
Easily the best plugs I've found at a reasonable price. Solid feeling with good quality and they look good with easy to see red/black labeling. The tips tend to unscrew too easily, but this is a non-issue when they are in use, just something you have to be careful not to lose when assembling. It's a bit tricky to spread the wire out evenly at the exact right length. If screwing the plug together is hard at all, go back and shorten how much wire you bend over the lip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 16, 2025
★★★★★ 5
Solid banana clips
Size: 5 Pack, Pattern Name: Banana Plugs
Ah yes, I used these solid banana plugs to convert my wires. It’s pretty easy to set up once the wire housing has been stripped and really cleans things up nicely. I haven’t had any discernable hissing, noise problems, or connection issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 3
Get the right wire guage
Size: 1 Count (Pack of 1), Pattern Name: Banana Plugs
I rate the banana plugs themselves 4 stars. They are everything I expected and work as advertised. It's the experience of assembly that I rate three stars. The way these work is -- you strip off the outer insullation of your wire and separate the two leads (positive and negative). Then you strip some length of insulation off the end of one of your leads, you unscrew the banana plug so that it separates into its respective base (lower) and contact (upper) halves, you slip the wire up through the base, you flare the copper strands of the wire and fold the individual strands over the very top of the base (about 1/16 of an inch) (taking care not to extend the strands over the threaded barrel of the base), then you screw the upper contact onto the lower base and voila, banana plug / wire assembly. It's not as complicated as it sounds. Go to the Monoprice website and watch their excellent instructional video.
Here's the thing though. While the assembly is not complicated, it is tricky, and if you don't get your proportions right the first or second or third time, you'll have to do it over. Fist of all, if your wire guage is relatively thin, like my 16-guage speaker wire, you'll find that the entire wire, insullation and all, will slip right through the base of the plug without butting up against the bottom of the base. If this is the case, then the wire is left to sort of flop around inside the plug and that has a kind of unfinished, amateur look and feel to it, whereas if the wire butts up against the bottom of the base, it has a solid, one-piece professional look. So, to my mind, there's a sweet-spot for wire guage that works best with this plug -- not too thin and not too thick. And since Monoprice has debunked the thicker-is-better myth (the quality of the copper is the real determinant), then you should feel free to get the wire guage that fits the plug.
Next -- and here's where it gets tricky -- once your copper extends beyond the top of the base, you'll need to limit this extension to about a sixteenth (no greatrer than a fourth) of an inch. Then you very delicately flare out the individual strands, in a 360- degree arc, and fold the strands over the top of the base. This takes a fair degree of manual dexterity, especially if the wire is "floating" inside the base and its travel is not stopped where the insullation meets the base. You'll have to hold the wire and base steady in the fingers of one hand, then flare out the wire strands with either your fingers or a suitable object (the working end of a ball-point pen worked for me) with the other hand. This one-sixteenth measure is important. If you extend wire strands beyond the top and over the threads of the base, you'll find that screwing the contact end onto the base is impossible and you'll need to start over. One or two strands is OK and almost unavoidable. In that case the screwing will catch but if you take a pair of pliers to it you can muscle through. By the way, you can avoid the whole mess by getting the open-screw type, which I'm sure will work just as well without any of the hassle of assembly.
Like anything else, if you do it a few times to make the mistakes and learn the tricks, then it will become second nature, and if you've already done that, then my review might seem overly fussy. In that case feel free to leave comments to help other readers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 15, 2012
★★★★★ 5
Wish they came with instructions...
They are cheap and work great. They plug right into my Pioneer vsx521 receiver and my Paradigm Atom monitor speakers.
I wish they came with instructions, because it took me about 10 minutes to realize the bottom part unscrews in addition to the top part.
Here are my instructions for installation:
1) Unscrew the bottom part of this connector (the thin metal underneath the red/black ring).
2) Make sure the Banana Plug (which may be loosely screwed into the top part of the connector) is fully tightened down
3) Strip your wire tips to 3/8 of an inch (or just slightly under)
4) Run the first newly stripped wire end through the bottom part you removed in step 1, such that the stripped end of the wire is entering through the flat end and exiting through the smaller threaded end.
5) Leave about 1/8 to 3/16 of an inch of stripped wire hanging past the exit hole.
6) As evenly spaced as possible, bend the over-hanging wire strands over the exit hole (all around it, like a hat). If done properly, the wire should not fall out if you give it a VERY GENTLE tug.
7) Screw the top metal part (with the actual banana plug) back onto the bottom part. It may be difficult if your stripped wire is hanging too low. I've used a pair of pliers to grip the bottom part of the connector while I twist the banana plug side with my hand.
If done correctly, you should be able to put a lot of tension between the wire and connector without removing/damaging it.
UPDATE:
I just recently helped my dad install his 5.1 system without these... it sucked... This item (5 pairs of them in this case) and a good wire stripper can save you alot of pain (both physical and mental). The connectors on the back of his receiver are the kind where bare wire comes in from the side and then the connectors screw down (with a banana plug hole in the center which is where this product would come into play). I felt like a surgeon trying to get a bare wire end into the little slot, and then holding it there while I tighten the connector which is almost impossible since they are so close together...
GET THESE!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2012