Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
bugaboo donkey buffalo Bugaboo Donkey 5 Mono 2-in-1 StrollerThe future ready stroller that grows with your family. The Donkey 5 Mono converts from single to double in only three clicks. Converts to a double with Duo extension set Large total storage up to 44 lbs Easy to maneuver on all terrains Breathable PureBreeze mattress with dual sides and antibacterial protection Large extendable UPF 50+ sun canopy Reversible and reclinable seat Adjustable five point safety harness One piece self standing fold or two
The future-ready stroller that grows with your family. The Donkey 5 Mono converts from single to double in only three clicks.
-
Converts to a double with Duo extension set
-
Large total storage up to 44 lbs
-
Easy to maneuver on all terrains
-
Breathable PureBreeze™ mattress with dual sides and antibacterial protection
-
Large extendable UPF 50+ sun canopy
-
Reversible and reclinable seat
-
Adjustable five-point safety harness
-
One-piece self-standing fold or two-piece compact fold
-
Car seat compatible (adapters needed)
-
Add a wheeled board (sold separately) to stroll with three children
General
Stroller weight (fully assembled) With seat: 15.1kg/33.28 lbs. With bassinet: 16.05 kg/35.38 lbs.
Stroller width 23.6 in (Mono configuration)
Age range 0 months – 4 years
Dimensions
Front wheels 10 in
Rear wheels 12 in
Min – Max adjustable handlebar height 86 – 106 cm/33.86 – 41.73 in
Capacity
On the seat 50 lbs (per seat)
In the underseat basket 22 lbs
Side luggage basket 22 lbs
Materials
Inner and outer fabric 100% polyester
Handlebar grips 100% PU faux leather material
Mattress Outside: 100% polyester. Filling: 100% polyurethane foam.
Care instruction
Washing and cleaning All fabrics are machine washable at 86°F. The faux leather grips can be cleaned with a damp cloth. Always consult the washing label for the exact instructions.
What's in the Box?
Stroller base
The hardware for your Bugaboo Donkey 5. Comes with a chassis, wheels, wheel caps, and pre-assembled grips.
Seat
Including a seat hardware, a footrest, a seat fabric, a carry handle, a leather-look grip, and a five-point safety harness.
Bassinet
With a breezy panel for breathability and visibility. Including bassinet hardware, bassinet fabric, and an aerated mattress.
PureBreeze™ mattress
With dual sides for summer and winter. Featuring enhanced breathability and antibacterial technology for a healthier strolling environment.
Sun canopy
With UPF 50+ protection and a peek-a-boo panel. Including wires and clamps.
Rain cover
Protect your children from last-minute weather changes.
Side luggage basket and underseat basket
Maximum capacity 10 kg/22 lbs in each basket.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 2372 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Great product
Color: Black, Size: 4 Panel-88''
Literally exactly what I was needing
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 5
It's good...
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
It's good....took about 45 minutes to put together. No issues. Looks great...made the wife happy....
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
★★★★★ 5
Durable non see through fabric
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
This room divider is exactly what I need. It is very durable and easy to move around. You can’t see through the fabric. I love it. My reason for purchasing this divider is to use as a divider and as a backdrop holder. And it serves both purposes perfectly. It looks much better in person than on camera. It did have the spots on one side on all of them but in a few days they went away. It foldaway and tucked away easily.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 14, 2025
★★★★★ 4
Great product
Color: Black, Size: 4 Panel-88''
Love the look of this after it’s put together. It’s pretty sturdy and the connecting clips allow you to shape it different if you need it to fit in a corner. We use this at work so it’s great for the space we use it in. A little hard to store because it doesn’t fold up nicely because of the feet on it but I’m happy with it overall.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026