SKU: 35888407882
hauck flamethrower

hauck flamethrower XM42 Lite Flamethrower — Hoplite Armor-Body Armor

Sale price$21.43 Regular price$23.81
Save 10%

Pay in installments of $5.95 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 8 - Aug 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

hauck flamethrower XM42 Lite Flamethrower — Hoplite Armor-Body Armor*Banned in Maryland, requires a pyrotechnic license in California *Electronic waiver will be sent after order and must be signed before shipment. *Need additional fuel capacity? Add our Backpack Conversion Kit and Ultralight Backpack. Each XM42 Lite is precision formed and hand assembled in the USA using numerous different components and high quality materials. Fuel tanks are fully hand TIG welded and pressure tested. Many electrical components and

 

*Banned in Maryland, requires a pyrotechnic license in California

*Electronic waiver will be sent after order and must be signed before shipment.

*Need additional fuel capacity? Add our Backpack Conversion Kit and Ultralight Backpack.

Each XM42 Lite is precision formed and hand-assembled in the USA using numerous different components and high quality materials. Fuel tanks are fully hand TIG welded and pressure tested. Many electrical components and wiring are hand soldered. We pour significant effort and technical skill into each build, and take pride in our work. We buy parts from and employ the services of local businesses, and do our best to acquire as much as possible from American companies. Due to the semi-custom nature of the product, slight variations in finish, dimensions, and materials may occur. 

The XM42 Lite is fully disassemble-able by the end user if necessary for aftermarket custom finishing.

By agreeing to purchase and/or receive a model of the XM42 Lite from Flash Point Industries, LLC, you understand and acknowledge that use of the XM42 Lite may result in injury or even death. In recognition of the inherent risks of the XM42 Lite, you confirm that you are physically and mentally capable of handling, operating, and/or using the XM42 Lite. You further confirm that you will not permit anyone under the age of 18, or anyone over 18 who you do not believe is mentally capable, to handle, use, or operate the XM42 Lite. You participate willingly and voluntarily and assume full responsibility for personal injury, accidents, or illness, including death. You also assume responsibility for damage to or loss of personal property as the result of an accident. 

In consideration of the Activity provided, you, for yourself and your heirs, personal representatives or assigns, do hereby waive, release, discharge, hold harmless, and indemnify Flash Point Industries, LLC, any related entities, and their members, managers, agents, employees, and volunteers (the “Releasees”), from any and all liability, claims, cause(s) of action, present or future, and waive any claims for economic damages, personal injury damages, emotional distress damages and all other damages arising from my handling and/or use of the XM42 Lite, even if they arise from or are increased as a result of the negligence of the Releasees.

BY ORDERING YOU CONFIRM THAT YOU HAVE HAD SUFFICIENT OPPORTUNITY TO READ THIS ENTIRE AGREEMENT. YOU UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS. YOU UNDERSTAND THAT BY AGREEING TO THIS DOCUMENT, YOU MAY BE WAIVING VALUABLE LEGAL RIGHTS. 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 35888407882

Discover Niche Categories That Outsell hauck flamethrower

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 12 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
stookie778
Pawtucket, US
★★★★★ 5
Works amazingly, but only if you install it correctly.
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you purchasing Siless Liner 157 mil (4 mm) Sound Deadening mat, to block unwanted sounds in your car, this is what you need to buy. But wait! It's not the only thing you need to buy if you want to "actually" deaden sound. By itself, it will definitely block a noticeable amount of sound, and, most likely, that's all you realistically need. But... But... If you want the Siless Liner Sound Deadening Mat to really help you take it up a few notches, to get the best sound almost bordering on soundproofing, listen up. You will have to install traditional butyl rubber first. Doesn't have to be the Siless brand, but I'm sure they would love to sell both to you, I used both Killmat (80mil) and Noico (50mil). I have a Honda S2000. It's a two-seater convertible sports car if you don't know what this car is, and it's loud when I'm driving above 60mph. I also happen to have a sound system installed as well. Other than that, the car is stock. I first installed the butyl rubber on the car's interior sheet metal. I went all out and covered everything I could. I didn't need to but I wanted to. I was extremely impressed with the results. But I wanted to go further. Not because I needed to but because just wanted to see what it would be like. So I bought Siless Liner 157 mil (4 mm) 36sqft Sound Deadening mat to go on top of the butyl rubber mats. I put this over every area I installed the butyl rubber. I had to be careful of clearance issues since I added a significant amount of underlayment, and you should too. If you put butyl rubber sound-deadening materials in 50% of the total interior area, you'll hear a noticeable improvement. If you put butyl in about 80% of the total area, you'll be even more amazed at the improvement, compared to before. I originally did all the above myself, so that's my experience and so your mileage may vary. I then installed the Siless Liner Sound Deadening mat over every place I could even going further than I could with the butyl rubber. I used the Siles Liner in areas where butyl rubber would not have been effective, such as the roll bar hoop area and large empty cavities or holes. I covered everything I could, firewall, doors, floor pan, transmission tunnel, trunk, trunk lid, fuel tank area, rear quarter panels, and rear-wheel tunnels, in Siless Liner Sound Deadening Mat. WOW!! The Siless Liner Sound Deadening Mat was the icing on the cake! Let's not forget, this car is a convertible sports car so it will never be a quiet ride, ever. But I can now actually have a conversation with a passenger at a normal-ish volume! This also means I can now have a normal hands-free phone call without having to plug one ear to block out the noise! My sound system sounds so much better! Just by going through the install process, I looked for any vibration, rattle, squeak, and noise-prone areas to either eliminate or reduce unwanted noise production. If you forget this step, the inside and outside of your car will rattle and buzz. I skipped this step the first time around. But did it right before I installed more butyl rubber and the improvement was impressive, especially inside the car. Outside the car, I didn't notice a difference until I put the last layer of Siless Liner Sound Deadening Mat. The sound deadening mat works both ways from what I can tell. If I turned up my music, as loud as I occasionally do, parked in the attached garage to the house, with the garage door closed, I would be barely able to tell the car was playing music in the garage. It sounds like it is another car, just a little bit down the street, with a very loud base. If you stand 20 feet away outside the car, the sound system is noticeable, but not obnoxious by a long shot. Get a 3 piece wood/metal roller set as well, which makes quick work of large areas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 23, 2021
L
Verified Purchase
Ligia
Chelsea, US
★★★★★ 5
Better than Kilmat
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Great adhesion, and you can immediately see the sound difference when you rap the area and compared it to another area without it. Also, very easy to cut and apply. Once on, you may not be able to peel it and reposition it, so be sure where you want it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
J
Verified Purchase
J M.
Belleville, US
★★★★★ 3
Not much noise reduction…
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Easy to install but did not provide much sound dampening…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
M
Verified Purchase
Mike
Whiting, US
★★★★★ 5
Great sound mat for the price!
Style: 50 mil 50 SqFt, Style: 50 mil 50 SqFt
This is a good product. Many people go with KILMAT because of the value to price point. I did as well. When you clean the surface (in my case it was all painted metal) this stuff sticks very well. I do recommend you use a seam roller of some type, I used Lumiteco 3 piece roller set. This will help with adhesion and mostly flatten the overlapped edges. It also helps you see where you have rolled as it leaves little grooves. The difference when we had no sound mats and after was very impressive. We haven't finished our install yet and it is quieter than when we had an interior in the van. There are thicker mats available in other brands, but this will work great for our van build, but this helps keep the weight down. It is quality material, just be careful when you are removing the backing, the edge of the foil face can cut you. I suggest you layout where you are installing the mat and cut to fit. From what I have read, you don't need to cover every inch in the vehicle, just spot install for a big difference. I chose to cover most surfaces to help keep sound out when we are sleeping in the van. We haven't finished putting the van yet, but we have driven it around and been very satisfied with this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
P
Verified Purchase
Paul
Lowell, US
★★★★★ 5
Excellent sound deadening mats
Style: 80 mil 36 sqft, Style: 80 mil 36 sqft
Purchased these for a 2020 Lexus RX350 due to the hollow sound of the car doors when shutting. They sounded cheap. The mats are super sticky and I applied them when the doors were hot from sitting in the sun. They alubutyl sticks like crazy and the end result was perfect. Now I have solid sounding doors. Good quality product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026

recommand products