SKU: 3714299546
cardboard plant indoors

cardboard plant indoors Zamia Furfuracea – The Cardboard Palm – Happy Houseplants

Sale price$21.45 Regular price$23.83
Save 10%

Pay in installments of $5.96 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 9 - Aug 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

cardboard plant indoors Zamia Furfuracea – The Cardboard Palm – Happy HouseplantsTheres something timeless about Zamia furfuracea, better known as the Cardboard Palm. With its thick, paddle shaped leaves and bold, sculptural form, its the kind of plant that instantly draws the eye. It has a prehistoric feel to it, and for good reasonthis isnt actually a palm at all, but a cycad, a family of plants that have been around since the time of the dinosaurs. The first thing youll notice about this plant is its unusual texture. The leaves

There’s something timeless about Zamia furfuracea, better known as the Cardboard Palm. With its thick, paddle-shaped leaves and bold, sculptural form, it’s the kind of plant that instantly draws the eye. It has a prehistoric feel to it, and for good reason—this isn’t actually a palm at all, but a cycad, a family of plants that have been around since the time of the dinosaurs.

The first thing you’ll notice about this plant is its unusual texture. The leaves aren’t glossy like many tropical plants—instead, they have a slightly rough, almost felt-like surface, earning the name "Cardboard Palm." They grow in a neat, arching pattern, emerging from a sturdy central base, creating a structured, architectural look that works beautifully in modern or minimal interiors.

This is one of the easiest statement plants to care for. It thrives on neglect, stores water in its thick roots, and is perfectly happy with the occasional dry spell. If you’re after something that looks dramatic but doesn’t demand much attention, this is a perfect choice.

Zamia furfuracea Size

  • Pot size: 19cm
  • Height: Approx. 70cm tall (with potential for slow but steady growth)
  • Shape: Compact, structured form with outward-arching leaves

Native Habitat and Growth Patterns

Native to the coastal regions of Mexico, Zamia furfuracea thrives in sandy, well-draining soil and is adapted to store water in its thick, underground caudex. This makes it an excellent choice for homes where watering is sometimes forgotten!

Its tough, slightly fuzzy leaves are an adaptation to intense sun and dry conditions. Over time, the plant develops a stout, woody trunk, adding even more character.

How to Style the Cardboard Palm at Home

Zamia furfuracea is a sculptural statement plant that works well in minimalist, modern, or tropical-inspired interiors. Its upright, arching foliage creates a bold focal point, whether displayed on its own or grouped with other structural plants like Dracaena Draco (Dragon Tree) or Cycas Revoluta (Sago Palm).

  • For a sleek, contemporary look: Pair it with a black or stone-finish planter.
  • For a natural, earthy feel: Choose a textured terracotta or ceramic pot to complement its rugged charm.
  • Ideal for living rooms, offices, or bright hallways where its striking form can be fully appreciated.

Zamia furfuracea Care Requirements – Low Maintenance & Drought-Tolerant

Zamia furfuracea is incredibly easy to care for, making it a great choice for plant lovers of all experience levels.

  • Light: Prefers bright, indirect light but can tolerate some direct sun. Low light will slow its already gradual growth.
  • Watering: Drought-tolerant—allow soil to dry out completely between waterings. Overwatering is the biggest risk!
  • Humidity: Not fussy—adapts to most home environments.
  • Temperature: Prefers warm conditions (avoid temperatures below 10°C).
  • Feeding: Feed monthly in spring & summer with a balanced fertiliser. We recommend our Organic Tropical Plant Food to support healthy growth.

Why Choose Zamia Furfuracea?

  • Low-maintenance & resilient – Perfect for those who want a tough, long-lived plant.
  • Drought-tolerant – Stores water in its thick trunk and leaves, meaning less frequent watering.
  • Unique prehistoric charm – A rare find with a bold, architectural presence.
  • Perfect for beginners & collectors alike – Grows slowly, requiring little attention but making a big impact.

Interesting Facts About Zamia Furfuracea

  • Not actually a palm—it belongs to the ancient cycad family.
  • Its thick, leathery leaves are slightly fuzzy to the touch, like fine sandpaper.
  • One of the oldest plant species on Earth, dating back to the time of dinosaurs!

Zamia furfuracea FAQs

Q: How fast does Zamia furfuracea grow?
A: Very slowly. It can take years to reach its mature size, making it a long-term plant that won’t outgrow your space quickly.

Q: Can this plant be kept in low light?
A: It will survive in lower light, but its growth will be much slower. Bright, indirect light is best for a healthy, thriving plant.

Q: Is Zamia furfuracea pet-friendly?
A: No, this plant is toxic if ingested, so keep it out of reach of pets and children.

Explore More

Looking for bold, architectural houseplants? Discover our other sculptural statement plants, such as:
Cycas Revoluta (Sago Palm) – A prehistoric favourite with feathery fronds.
Dracaena Draco (Dragon Tree) – A striking, slow-growing tree with dramatic spiky leaves.

Want to learn more about caring for slow-growing houseplants? Read our latest blog post for expert care tips!

Final Thoughts

Zamia furfuracea is a plant for life. If you’re looking for something low-maintenance yet striking, with a fascinating history and a sculptural form, this is the one. Add it to your collection today and enjoy a piece of botanical history in your home.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 3714299546

Discover Niche Categories That Outsell cardboard plant indoors

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 27 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Elton Smith
San Leandro, US
★★★★★ 5
Forget Adventurer 5M , This is the true and easy to use beginner machine
Set name: Ender 3 V3 SE
This is my 3rd 3d printer. Once I spent about 45 minutes assembling it has been printing nonstop since the amazon driver dropped it off, these are the best for reliability and perfect for hobbyists. It is not the quickest machine out there, but it makes up for it with a quality print good price as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
H
Verified Purchase
hearmeout
West Palm Beach, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Grantham, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Louisville, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Waukegan, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026

recommand products