Pay in installments of $5.96 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 16 - Jul 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
summer infant sit and play Pop 'N Sit Portable Booster (Teal & Grey) – Kids2, LLCDescription The original Summer Pop 'N Sit Portable Booster is the ultimate go & grow seat, with over 2 million sold worldwide! This #1 Booster Seat* has 3 modes of use: floor seat, feeding seat with removable tray, and toddler booster. For babies, attach to an adult chair using the included straps and BPA free tray to create a portable chair top high chair. For toddlers, use the seat as a booster that can pull up to the table by removing the tray. In
DescriptionThe original Summer Pop 'N Sit Portable Booster is the ultimate go & grow seat, with over 2 million sold worldwide! This #1 Booster Seat* has 3 modes of use: floor seat, feeding seat with removable tray, and toddler booster. For babies, attach to an adult chair using the included straps and BPA free tray to create a portable chair top high chair. For toddlers, use the seat as a booster that can pull up to the table by removing the tray. In floor mode, you can use the Pop ‘N Sit whenever you need an extra seat - picnics, sporting events, or right at home! The rear storage pocket holds your daily essentials. Folds compactly when not in use and includes a carrying bag with shoulder strap. This seat is a new parent must-have that requires no tools for assembly. Dishwasher safe tray. Seat and straps wipe clean with a damp cloth and mild soap. Folded dimensions: 15 x 13.5 x 14.75” or 5 x 15”. Made for 6 months to 3 years old or up to 37 pounds. Third party safety tested and approved. (*Circana, Retail Tracking Service, U.S., Highchairs-Boosters, dollar sales, Jan-Nov 2023 combined)
- Summer Pop ‘N Sit is the original go & grow seat! 3 modes of use: floor seat, feeding seat with removable tray, and toddler booster; great for days out, evenings in, weekend trips & more
- Safe for indoor and outdoor use. Pull up a seat for park picnics, camping trips, and visits to grandma’s house; includes a carrying bag with shoulder strap to bring along on all your adventures
- Compact design easily folds to 5 x 15 inches; Easy to clean with dishwasher safe tray and seat wipes clean; includes a rear storage pocket for little essentials
- Gender neutral teal design; includes 3-point safety harness, BPA free tray, and safety straps for attaching to adult chair; rated for ages 6 months to 3 years or up to 37 pounds
- A must-have item for parents on the go, grandparents & more! Great gift idea for baby showers, birthdays, Christmas, and other gifting occasions
Price & Details
MSRP: 24.99
SKU: 13620-000
Dimensions (in): 14.57" (H) x 15.35" (W) x 15.35" (L)
User Age Range (months): 4 - 48 months
Assembly Required: No
Batteries: Not Required
Materials: 65% Metal, 23% Plastic, 12% Fabric
Instructions & Care
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 24 reviews
Sort
Product Reviews
★★★★★ 5
Incredible 9.2 Surround receiver at an unbeatable price.
I may return at a future date to give a more complete review, but others that are much more knowledgeable about audio equipment than I have already done so.
For me, the Onkyo (Onkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver) replaced a much older (2001) TX DS787 5.1 100 W Surround receiver that listed new for around $1050. I probably didn't pay quite that much but certainly something near $900. It was great for its time, perhaps even advanced with THX, Dolby, and other listening modes.
But it didn't have: HDMI inputs or outputs, any BlueTooth capability, no hard wired or WiFi connectivity or basically any operating or connection modes that most all modern receivers have. This turned into a big problem with modern LED/LCD/OLED TVs, Alexa and other now common devices.
I bought my new Onkyo TX-NR7100 from Amazon for $625. Other retailers (e.g.Best Buy) advertise it for up to $1200, so Amazon's price is outstanding. Set up was far more complicated (for me) than any previous receiver that I ever owned, mostly because there were a very large number of back panel input and output jacks, to and from the TV, as well as speaker outputs for 9.2 surround.
Suffice it to say that once everything was connected properly (I made a few mistakes along the way), I was completely thrilled. The On Screen Display, completely accessible either from the front panel or the remote was far superior to anything I had ever seen before. Literally every operating parameter is accessible to the user. And I used most of them.
It is also completely WiFi ready so my 150 Gbit home Wifi network lets it connect wirelessly and stream music error free. BlueTooth is also another way to connect almost any device to it for audio and audio/video playback if you connect the digital connections to and from a modern TV. It also speaks and listens to Alexa, although I must confess that I haven't played around with that much yet.
This is already much longer than I had intended, so let it suffice to say that the Onkyo TX-NR7100 is an absolutely incredible receiver for an incredible price. I'd give it 8 stars if I could.
JM TEPPER
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 7, 2024
★★★★★ 5
Sounds great.
Just received my Onkyo TX-NR 7100, watched a few YouTube videos before it arrived, so set up was easy. Ran accuEQ, I am getting new front speakers so I’ll wait to run Dirac. After accuEQ, I still had to make a few adjustments, to the speaker levels and especially the sub. It set my subwoofer way too low. As of right now having no problems with Bluetooth. I’ve only listened to music so far, can’t wait to watch a movie. For now I have a 5.1.2. System, getting new fronts, the Klipsch r51-m’s will go to the rear surround and Klipsch r41-m’s will be my height speakers in a 5.1.4 system. So far loving this avr.
Update 2: Just calibrated with Dirac for the 6th time. They tell you if you sit in a recliner, reclined measure with it reclined. Well I measured with the chair in its upright position. It makes a huge difference I hear the surrounds much better. Btw I listen to all channel stereo, I know audiophiles say it sucks, however I listened to 2 channel stereo for 20 years, when there was nothing else. I didn’t buy a 9 channel avr to listen to 2 channel stereo. Like Randy the cheap audio man says “ audiophiles aren’t always right. If it sounds good to you, that’s all that matters.” So try calibrating in the upright position, or if you sit on a stationary chair or couch, try positioning the mic slightly forward of your listening position. It makes a huge difference. Hope this helps, enjoy.
Update:
Ok bought Klipsch rp-600m speakers for the front with 52c center. 51m surrounds, 41m rear heights. Polk owm3 front heights. Why Polk? Lighter easy to hang and as height speakers they are only there for atmos. Ran Dirac live, the application does what it would take several hours to make it sound like it does, if I even could get it to sound so good. Apple TV 4K with my Hisense U8K. The google tv interface is ok, but Apple TV is faster and easier. The Onkyo 7100 is a gem, runs pretty warm but I have it out in the open. If you are going to put in a cabinet I suggest a fan. Very happy with the whole system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2025
★★★★★ 5
Great for UTV rear light install!
Size: 16AWG -10FT 2Pin DT
I had a set of 3” Nilight pod lights with wiring harness to install as rear lights on my Ranger 570 SP. The Nilight harness with relay was great! But it was too short to keep the relay and fuse in the front compartment on the pulse panel. These were the perfect solution!
The extensions are plugged in under the tunnel to each of the individual light leads from the Nilight harness. And there was just enough length to run behind the seat back, up the driver side roll bar, and to each light. (Had about 1’ too much for passenger side light, so should be fine for full-size Ranger too.)
Now have a weatherproof, factory quality installation with no splices or solder joints. The only mods I had to make for the entire install (not related to these extension cables) were: 1) Cutting the ring lugs off and adding waterproof heat shrink butt splices to Polaris pulse plug, and 2) Buying a factory-style Carling L1 illuminated switch to replace the round switch provided. (This is a direct plug and play too since the Nilight switch wiring has 1/4” faston connectors.)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 27, 2024
★★★★★ 5
Exactly what I needed
Size: 16AWG -10FT 2Pin DT
This was perfect for me. I had two lights bars in my rear bumper and needed to extend the harness to my fuse block. Great value
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 19, 2026
★★★★★ 5
10 foot long
Size: 16AWG -10FT 2Pin DT
Worked great. Plugged in with no problem.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026