SKU: 44733580998
celsius herbicide wg

celsius herbicide wg Celsius WG Broadleaf and Grassy Weed Control for Warm-Season Turf

$25.27 $28.08
Save 10%
No.2 Bestseller on piotrzbierski.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

celsius herbicide wg Celsius WG Broadleaf and Grassy Weed Control for Warm-Season TurfCelsius WG is a broadleaf and grassy weed control for St Augustine, Bermuda, Zoysia, and Centipede grasses. It is an excellent choice in summer because it has no labeled heat restrictions. This single use pack takes all the guesswork out of weighing and measuring the product. Perfect for the DIYer! Each 0. 226 oz pack covers 4,000 sq ft at the low rate OR 2,000 sq ft at the high rate Active ingredients are Dicamba (57. 4%), Iodosulfuron methyl sodium

Celsius® WG is a broadleaf and grassy weed control for St Augustine, Bermuda, Zoysia, and Centipede grasses. It is an excellent choice in summer because it has no labeled heat restrictions. This single-use pack takes all the guesswork out of weighing and measuring the product. Perfect for the DIY’er!

  • Each 0.226 oz pack covers 4,000 sq ft at the low rate OR 2,000 sq ft at the high rate
  • Active ingredients are Dicamba (57.4%), Iodosulfuron-methyl-sodium (1.9%), Thiencarbazone-methyl (8.7%)
  • Controls more than 150 varieties of weeds
  • Great for warm-season grasses such as St. Augustine, without fear of damaging turf
  • A non-ionic surfactant is recommended with Celsius

Product Description:

Celsius WG is a post-emergent herbicide that comes in the form of wettable granules, meaning that you mix in water to create a liquid spray. It is formulated to treat the broadest spectrum of weeds on the market, including many of your most difficult grassy and broadleaf weeds to control. 

Adding a non-ionic surfactant is recommended.

Weeds controlled (but not limited to) include the following:

  • American Burnweed
  • Carpetgrass
  • Common purslane
  • Dallisgrass (suppression)
  • Dollarweed
  • Doveweed
  • Florida betony
  • Florida pusley
  • Large crabgrass
  • Lawn burweed
  • Prostrate spurge
  • Spotted spurge
  • Virginia buttonweed

Application Information:

This is a professional formulation that should be applied from a battery or pump sprayer.  Use a tip that creates a finer mist when spraying. 

Do not mow immediately after treating with this product or before the spray has dried. After treatment, do not transfer clippings to non-target areas.

Celsius WG can be used at any time during the growing season on the following grass types:

  • Warm Season Lawns - Bermuda (including hybrid Bermuda), St Augustine (including Floratam), Zoysia, Centipede.

***NOT for use on Bahia grass or any cool-season turf types.

 Coverage/Gallon Low Rate Coverage: 4,000 sq ft
Medium Rate Coverage: 2, 750 sq ft
High Rate Coverage: 2,000 sq ft
Application  Details Low Rate: 1 packet to 4 gallons of water
Medium Rate: 1 packet to 2.75 gallons of water
High Rate: 1 packet to 2 gallons of water
Water-In  Instructions

Do not water this product in. Do not apply if rain is forecasted within the following 48 hours.

Shipping Information:

Shipping Costs

Included for most states within the U.S.
NO P.O. Boxes
State Restrictions
 Alaska (AK), California (CA), Connecticut (CT), Hawaii (HI), Oregon (OR), New York (NY), Vermont (VT), and Washington (WA)
Stickers

Yes, free sticker with this item
Typical Delivery Time

4 - 7 business days
Product Type Water Dispersible Granule
Cancel | Return | Exchange

All sales are final, no cancellations, returns, or exchanges

 

*Some products may not be registered for sale or use in all states or counties and/or may have state-specific use requirements. This information is for reference only. It is the responsibility of the user to verify the product is registered and appropriate for use in a given state.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 44733580998

Discover Niche Categories That Outsell celsius herbicide wg

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 525 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Houston, US
★★★★★ 5
Quality
Quality item. Using a butcher block on top to make a desk.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
A
Verified Purchase
abur
Belleville, US
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together. Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there. This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
N
Verified Purchase
Nancy
West Palm Beach, US
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
K
Verified Purchase
Kim R-A
Louisville, US
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
J
Verified Purchase
Joseph E. Brackman
Natrona Heights, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020

recommand products

Umbrella Tree | Schefflera Gold Capella
21.36
6in-14in Schefflera Amate 'Umbrella Tree' – Paraíso Plant Studio
28.25
Schefflera Arboricola 4" pot
28.06
Strongylodon macrobotrys, Turquoise Jade Vine
24.28
Australian Umbrella Tree 10"
27.80