SKU: 58878738418
philodendron florida variegated

philodendron florida variegated 20

Sale price$20.59 Regular price$22.88
Save 10%

Pay in installments of $5.72 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 17 - Jul 22

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

philodendron florida variegated 20Philodendron Florida Beauty is one of the most desirable and eye catching Philodendron hybrids, treasured for its multi lobed leaves and exquisite creamy yellow variegation. A member of the Araceae family, this rare tropical climbing plant is a hybrid of Philodendron pedatum, and is native to the humid rainforests of Central and South America. The deeply lobed leaves display a unique shape reminiscent of an elongated oak leaf, each one elegantly

Philodendron ‘Florida Beauty’ is one of the most desirable and eye-catching Philodendron hybrids, treasured for its multi-lobed leaves and exquisite creamy-yellow variegation. A member of the Araceae family, this rare tropical climbing plant is a hybrid of Philodendron pedatum, and is native to the humid rainforests of Central and South America.

The deeply lobed leaves display a unique shape reminiscent of an elongated oak leaf, each one elegantly marbled with splashes, streaks, or sectors of creamy-white, lime, or butter-yellow variegation. No two leaves are ever the same — every one is its own piece of living artwork. As the plant matures and climbs, the leaves become larger, more segmented, and increasingly dramatic.

Compact yet sculptural, Philodendron ‘Florida Beauty’ is an extraordinary statement piece for collectors and interior designers alike, bringing refined tropical charm and subtle variegated contrast to any indoor setting.


Philodendron ‘Florida Beauty’ – Care Guide

Light

Thrives in bright, indirect light. The variegation is most pronounced in strong filtered light. Avoid direct sunlight, which can scorch the pale areas, and low-light conditions, which may reduce variegation.

Watering

Water when the top 2–3 cm of soil feels dry. Keep the soil lightly moist but never waterlogged, and ensure excess water drains freely. Overwatering can cause root rot, while underwatering may result in drooping leaves. Reduce watering slightly in winter.

Temperature and Humidity

  • Temperature: Prefers warmth, 20–28°C. Avoid draughts and temperatures below 16°C.

  • Humidity: Requires moderate to high humidity (60–80%). Mist occasionally or place near a humidifier, especially in centrally heated homes.

Soil and Potting

Use a chunky, free-draining aroid mix — peat-free compost blended with orchid bark, perlite, and coco coir. This provides airflow while retaining gentle moisture. Repot every 1–2 years in spring to refresh the mix and support vigorous growth.

Feeding

Feed every 4–6 weeks during spring and summer with a balanced liquid fertiliser. Avoid over-fertilising, which may damage roots or dull variegation.

Pruning and Maintenance

Remove any yellowing or damaged leaves to keep the plant tidy. Wipe leaves gently with a damp cloth to remove dust and enhance their natural sheen. Prune back leggy stems to maintain a bushier shape or take cuttings for propagation.

Growth and Maturity

A fast-growing climbing hybrid, capable of reaching 1.5–2.5 metres indoors with support. When provided with a moss pole or coir totem, it produces larger, more lobed leaves with stronger variegation.

Common Issues

  • Loss of variegation: Insufficient light.

  • Yellowing leaves: Overwatering or poor drainage.

  • Brown edges: Low humidity or inconsistent watering.

  • Pests: Occasionally thrips, spider mites, or mealybugs.

Background and Benefits

Philodendron ‘Florida Beauty’ is a naturally occurring variegated form of Philodendron pedatum and is one of the most sought-after collector’s plants due to its stable, attractive variegation and distinct leaf shape. It combines the tropical vigour of its parent species with an artistic flair that makes it stand out among variegated aroids.

Beyond its beauty, like all Philodendrons, it contributes to cleaner indoor air and a sense of calm greenery in the home.


Quick Care Summary

  • Light: Bright, indirect; avoid direct sun

  • Water: Lightly moist; allow topsoil to dry slightly

  • Temperature: 20–28°C; avoid below 16°C

  • Humidity: Moderate to high (60–80%)

  • Soil: Chunky, well-draining aroid mix

  • Feed: Every 4–6 weeks in spring/summer

  • Growth: Climbing hybrid, 1.5–2.5 m; deeply lobed green leaves marbled with cream and yellow variegation


⚠️ Toxicity Note: Like all Philodendrons, ‘Florida Beauty’ is toxic if ingested and may irritate skin. Keep out of reach of pets and children.


🌿 Styling Tip:
Display Philodendron ‘Florida Beauty’ on a moss pole or climbing trellis to highlight its sculptural foliage. Its elegant marbling contrasts beautifully with darker plants such as Ficus ‘Abidjan’ or Alocasia ‘Polly’ for a luxurious tropical aesthetic.

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 58878738418

    Discover Niche Categories That Outsell philodendron florida variegated

    Top-Converting Item to Boost Your Average Order

    4.4 ★★★★★
    Based on 7 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    M
    Verified Purchase
    Mark Kadrich
    Waukegan, US
    ★★★★★ 5
    Works well and is easy to install.
    Model: SLH20025, Model: SLH20025
    I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing. Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble. The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition. Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway. All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 13, 2025
    J
    Verified Purchase
    Josh
    Cuba, US
    ★★★★★ 5
    Great product. Best value i could find
    Model: SLH20025
    I'm using talk to text, so forgive any grammatical and spelling errors. I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 6, 2026
    W
    Verified Purchase
    william scott
    Waukegan, US
    ★★★★★ 4
    Not simple, nor easy
    Model: SLH20025
    I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles. First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out. Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off. Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on. The material seems to be of high quality and I expect it will reduce the road noise in the cab.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 18, 2025
    M
    Verified Purchase
    Mike
    Fort Morgan, US
    ★★★★★ 5
    Great sound mat for the price!
    Style: 50 mil 50 SqFt, Style: 50 mil 50 SqFt
    This is a good product. Many people go with KILMAT because of the value to price point. I did as well. When you clean the surface (in my case it was all painted metal) this stuff sticks very well. I do recommend you use a seam roller of some type, I used Lumiteco 3 piece roller set. This will help with adhesion and mostly flatten the overlapped edges. It also helps you see where you have rolled as it leaves little grooves. The difference when we had no sound mats and after was very impressive. We haven't finished our install yet and it is quieter than when we had an interior in the van. There are thicker mats available in other brands, but this will work great for our van build, but this helps keep the weight down. It is quality material, just be careful when you are removing the backing, the edge of the foil face can cut you. I suggest you layout where you are installing the mat and cut to fit. From what I have read, you don't need to cover every inch in the vehicle, just spot install for a big difference. I chose to cover most surfaces to help keep sound out when we are sleeping in the van. We haven't finished putting the van yet, but we have driven it around and been very satisfied with this product.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on December 3, 2025
    P
    Verified Purchase
    Paul
    Carnegie, US
    ★★★★★ 5
    Excellent sound deadening mats
    Style: 80 mil 36 sqft, Style: 80 mil 36 sqft
    Purchased these for a 2020 Lexus RX350 due to the hollow sound of the car doors when shutting. They sounded cheap. The mats are super sticky and I applied them when the doors were hot from sitting in the sun. They alubutyl sticks like crazy and the end result was perfect. Now I have solid sounding doors. Good quality product.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 20, 2026

    recommand products