Pay in installments of $5.42 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 1 - Aug 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
monstera adansonii moss pole Monstera Adansonii in Moss PoleMonstera adansonii, commonly known as the "Swiss Cheese Plant" due to its unique perforated leaves, is a popular and relatively easy to care for houseplant. Heres how to keep your Monstera adansonii happy and healthy: Light Bright, Indirect Light: It thrives in bright, indirect light. Direct sunlight can cause leaf burn, while too little light can slow growth and reduce leaf perforation. A spot near a window with filtered light is ideal. Temperature
Monstera adansonii, commonly known as the "Swiss Cheese Plant" due to its unique perforated leaves, is a popular and relatively easy-to-care-for houseplant. Here’s how to keep your Monstera adansonii happy and healthy:
Light
- Bright, Indirect Light: It thrives in bright, indirect light. Direct sunlight can cause leaf burn, while too little light can slow growth and reduce leaf perforation. A spot near a window with filtered light is ideal.
Temperature
- Warm Temperatures: Maintain temperatures between 65°F and 85°F (18°C to 29°C).
Humidity
- High Humidity: Monstera adansonii prefers higher humidity levels. Aim for 60% or more. You can increase humidity by using a humidifier, placing the pot on a pebble tray with water, or grouping it with other plants.
Watering
- Moderate Watering: Water the plant when the top 1-2 inches of soil feel dry. Water thoroughly until it drains out of the bottom of the pot, then let the soil dry out slightly before watering again. Be cautious not to overwater, as it can lead to root rot.
Soil
- Well-Draining Soil: Use a well-draining potting mix. A mix designed for tropical plants, or a combination of peat, perlite, and orchid bark, works well. Good drainage is crucial to avoid waterlogged soil.
Fertilizing
- Balanced Fertilizer: Feed your Monstera adansonii every 4-6 weeks during the growing season (spring and summer) with a balanced, water-soluble fertilizer. Reduce feeding in the colder months.
Pruning and Maintenance
- Pruning: Prune as needed to control size and encourage bushier growth. Remove any yellow or damaged leaves to keep the plant healthy and improve air circulation.
- Cleaning: Wipe the leaves with a damp cloth to remove dust and keep the plant looking its best.
Repotting
- Repotting Frequency: Repot your Monstera every 1-2 years or when it outgrows its pot. Choose a pot that is 1-2 inches larger in diameter than the current one and refresh the potting mix to provide new nutrients and space for growth.
Support
- Support Structure: As a climbing plant, Monstera adansonii may benefit from a moss pole or trellis to support its growth. This allows the plant to climb and develop larger leaves with more dramatic perforations.
Pests and Problems
- Watch for Pests: Be on the lookout for common pests like spider mites, mealybugs, and scale. Regularly inspect the plant and treat any infestations with insecticidal soap or neem oil.
- Disease Prevention: Avoid overhead watering to prevent fungal issues and ensure good air circulation around the plant to reduce the risk of mold and mildew.
With these care tips, your Monstera adansonii should thrive, adding a touch of tropical flair to your indoor space.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 14 reviews
Sort
Product Reviews
★★★★★ 5
Denon avr ir remote port works great with sewell products
I bought a new entertainment center with glass doors and wasn't getting good signal range with the door closed. Plus i couldnt get a good of line site, since this cabinet was shorter than the orginal, and the location for my avr was further to the left than before and now my line of sight to the receiver was blocked from other parts of the room due to high couch back.
I tried a couple different cheap $10 devices that used stick on transmitters/receiver buttons but they were clumsy and didn't provide me a total solution for my room layout.
Works fantastic with a denon x1800 receiver (and many other models). It works directly with the denon's ir remote port in the back of the avr port. The solution is actually quite simple.
Plug a stereo 3.5 mm male to male plug in the denon ir port in the back of the avr and and the other end to the orange emitter box(puck). The pics are about the size of an oreo double stuff cookie Tuck the orange box/puck away whereever and plug the power in. The box doesn't need to seen or be pointed towards anything. It's location is only limited by the length of your stereo cable and access to AC power
Put the blue box puck anywhere in the room where you have general line of sight to it from where you will be using your remote, and plug power in. In my case, its sitting on top of one of my tower speakers. From there it clears the back of the couch and can see from the family room, eat-in kitchen area, and the kitchen beyond.
Done.
I didn't need or use any of the included emitter or transmitter cables, though if you dont have a denon, or other brand avr with an ir port to plug into , or also want to hide the blue puck ( in which case attach the included sensor cable), you'll need them. But for denon users with an ir port, you just use the two pucks and their usb power adapters. Simple.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
★★★★★ 1
Worked good then died at six months (Updated)
Worked good for a couple of months, then started to develop a lag between when you pressed a button on the remote, and when the TV would respond. If I moved the speaker blocking the TV’s IR receiver, and pointed the remote at it, it worked perfectly. Add the IR blaster back in and the delay returns. The delay kept getting longer and longer, sometimes 5 to 10 seconds. Then it just died. Would not pass any IR signals, even though the receiver and emitter both had power. Tried rebooting, changing communication channels to no avail. Out of Amazon return window. Manufacturer wants you do go through a troubleshooting process for warranty that is too complicated and time consuming. Customer Service Rep at Sewell send me a warranty replacement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2025
★★★★★ 5
Nice Product and Customer Service
I ordered this BlastIR Wireless Pro IR Repeater from Sewell to replace a wired version of an IR repeater from another company. We have moved our TV on to a wall location and are in the process of hiding all the wiring out of sight behind walls and/or in a cabinet. We still have some wires to go, but this product has enabled us to eliminate the IR wiring all together. It's a real improvement in both looks and performance over the cheaper, wired version we originally tried.
The BlasterIR's Receiver is the component that faces the room and receives the IR signal from our remote controls. It's small enough to fit in the space between our sound bar and the bottom of the TV. It's range is great for our room size (about 22' long and 18' wide) and picks up the remotes signal from a side angle that's almost parallel to the TV itself. The receiver is powered through one of the USB ports integrated into the TV (although the device itself supports either a USB or regular plug-in option). I haven't used them yet but Sewell appears to have provided a few options to help with affixing the IR devices in their final positions including some adhesive pads and a magnetic pad option as well.
I'm still playing around with the permanent placement of the IR Blaster Emitter. It sits inside a closed cabinet and faces the concealed cable box receiver, router and DVR components. It retransmits the various IR signals it receives from the IR receiver by blasting that signal to anything it faces. I just placed it in the cabinet about 5" away from the devices I wanted to control, plugged it in and it worked with no other set up.
So far the BlastIR is working seamlessly and with much better function response time than the cheaper IR version we'd tried at first. The lag time between when a button is pressed on the remote control and the action taking place on the device I'm communicating with is minimal. The emitter itself is plugged into an outlet on a surge protector powering the other in-cabinet devices, although it too could be powered via the provided USB connection if desired.
As a note, we did experience a shipping issue during our ordering process. The order it self was processed quickly and shipped in a timely manner. However, there was an issue with our actual receipt of the product and the USPS who reported it delivered to our mailbox when in fact it had not been. Regardless, we reached out to Sewell directly and they quickly resolved the issue for us with no problems and in a timely manner. I would recommend both this IR Blaster Pro product as well as Sewell as a trusted company itself.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2021
★★★★★ 3
Does NOT Transmit Through Walls
Quick and easy setup! Works great within the room. However, will not work effectively between walls (i.e. - AV closet to living room).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026
★★★★★ 5
Works perfectly - great product
My MBR TV set-up incorporates a cable box set up in a closet about 50 feet from the TV (hung over a fireplace). When it was set up the A/V used a wired infra-red set up that was wired thru the walls, under the floor, into the closet. Unfortunately some mice nibbled on the wiring and it does not work. I have tried everything including the Next Generation extender (over the years bought 6 of them for different TV's) and most recently the Startech. The Next Generation have not been updated in years and over time completely lose their ability to operate. No customer service at all; emails go into a black hole. I had high hopes for the Startech. Easy to set up and worked out of the box. The problem is the lag time. I could live with it when watching live TV, but it was totally impossible when it came to playing back programs from the DVR (which is cloud based). I was losing hope until I tried the Sewell Blaster. Took me less then 5 minutes to set up and it worked instantly. Little or no lag to speak of and I couldn't be happier.
NB. Speaking of Sewell, the absolutely BEST way to control your HDMI based TV is the Sewell Direct SW-30062 Dual Band InjectIR sold by Amazon for $55. This is truly plug 'n play and operates with absolutely no lag. Bought 2 of these to operate TV's in my apartment where I had to hide boxes in closets. Well made, great instructions (coordinated with the devices) and I just love this product. I bought mine direct from Sewell ) same price) because I couldn't find them on Amazon when I needed them, but they have a great return policy and I'm told great C/S. If you can't use these then go for the Blaster.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 30, 2018