SKU: 70041720293
dieffenbachia reflector plant

dieffenbachia reflector plant Dieffenbachia 'Reflector' | Mottled Cane

Sale price$22.70 Regular price$25.22
Save 10%

Pay in installments of $6.30 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 5 - Aug 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

dieffenbachia reflector plant Dieffenbachia 'Reflector' | Mottled CaneDieffenbachia seguine 'Reflector' Dark green leaves, lighter speckling and a pale central vein give Dieffenbachia 'Reflector' its contrast rich foliage. Broad blades sit on cane like stems, holding the crown upright above the pot. Young plants form a close foliage mass. With age, the stems thicken, the leaves gain size, and the crown becomes more prominent above the pot. Speckled dark Dieffenbachia foliage Dark green leaves with lighter green

Dieffenbachia seguine 'Reflector'

Dark green leaves, lighter speckling and a pale central vein give Dieffenbachia 'Reflector' its contrast-rich foliage. Broad blades sit on cane-like stems, holding the crown upright above the pot.

Young plants form a close foliage mass. With age, the stems thicken, the leaves gain size, and the crown becomes more prominent above the pot.

Speckled dark Dieffenbachia foliage

  • Dark green leaves with lighter green speckling.
  • Pale central vein running through each broad blade.
  • Upright clumping habit with cane-like stems.
  • Broader crown develops as the plant matures.
  • Node-bearing stems allow renewal pruning and propagation.

Tropical aroid growth

Dieffenbachia seguine is an accepted Araceae species with a range running from the Caribbean into tropical South America. In indoor pots, warm conditions, filtered light and an aerated substrate keep moisture moving through the root ball instead of sitting around the cane base.

Dieffenbachia 'Reflector' has dark, finely speckled leaves with a pale midrib. Regular wiping removes dust from the broad blades and exposes pests along the midrib, petiole joints and leaf undersides.

Dieffenbachia 'Reflector' care

  • Light: Give bright indirect or medium indirect light; hot direct sun can leave tan patches on the broad blades.
  • Water: Rewater after the top few centimetres of substrate begin to dry, then drain the pot each time.
  • Substrate: Use a chunky mix with fine bark, perlite, coco fibre or houseplant compost, and a small mineral fraction.
  • Temperature: Keep at 18–27 °C and protect the roots from draughts or cold floors.
  • Humidity: Moderate humidity reduces dry edging on broad leaves during warm growth.
  • Leaf care: Wipe the leaves with a damp soft cloth while holding each blade from underneath.
  • Feeding: Feed modestly during warm-season leaf production and rinse the substrate with plain water if salts collect.
  • Stem renewal: Remove old lower leaves at the petiole base; tall canes can be cut and rooted as node sections.

Reflector leaf checks

  • Tan dry patches: Direct sun or reflective heat may be reaching the blades; shift the plant into filtered light.
  • Sparse, leaning growth: Increase filtered light and turn the pot so the crown develops evenly.
  • Stem base softness: Check drainage, root firmness and moisture deep in the lower mix.
  • Crisp brown margins: Review watering gaps, warm dry air, salt build-up, and cold contact near the leaves.
  • Sticky residue or fine webbing: Inspect leaf undersides, the pale midrib, and petiole joints for scale, mealybugs, or spider mites.

Reflector pruning safety

Cut Dieffenbachia tissue can affect the mouth or throat and may irritate skin or eyes. During pruning, repotting and leaf removal, use gloves and rinse skin after contact with fresh cuts.

Reflector foliage details

Dieffenbachia belongs to Araceae. This selection shows dark green blades with lime flecking and a pale central vein.

Dieffenbachia 'Reflector' carries dark speckled foliage, a pale central vein and upright cane growth.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 70041720293

Discover Niche Categories That Outsell dieffenbachia reflector plant

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 11 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Ryan
Bozeman, US
★★★★★ 5
Works great, do the double drain for best results
My 06 Altima (185k miles) had been burning massive amounts of oil (like 4 quarts every 800 miles) due to a leaking PCV valve hose that took forever for me to narrow down (months). So after getting that under control I figured I needed to decontaminate the poor engine. When using this I idled my car to operating temp (about 8 minutes). Poured the bottle in, idled it for another 15 minutes. Drained the oil (black and thick). Put the plug back in, poured about 2.5qts of new oil in. Idled it for 10 minutes. Drained that (black but much thinner). Took the old filter off. Let both areas drain for 10 minutes. Put the plug back in, put the new filter on and filled with the 4.6qts of new oil my car calls for. Ran for a few minutes (like 2 with a few revs) and then let sit for 10 mins before checking the level. When I checked my dipstick it was so clean I thought I had a leak because I couldn't see it on any of the crosshatch. I ended up having to go by touch to get the reading. This stuff is amazing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 15, 2025
T
Verified Purchase
T. Lee
Natrona Heights, US
★★★★★ 5
Worked for me! Definitely recommend!
Used a whole can in my 2009 Civic 1.8L with 150k miles. I can honestly say, this helped remove a lot of sludge out of the engine. The oil came out with a water-like texture and super dark! Before taking out the oil filter, I added new lower cost oil to the engine and let the engine run for about 5 minutes to get that extra flush! You can definitely see all the extra sludge in the new oil! Drained and refilled with new oil and filter. The engine definitely sounded quieter and smoother than before! If you value your car, I would definitely recommend doing this flush on your higher mileage cars every 50k miles or so! Definitely recommend this LiquiMoly product!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2025
J
Verified Purchase
JJ
Massapequa, US
★★★★★ 5
3rd Update! See review... Good stuff and works as advertised...
Update - 3rd oil change/flush. Engine oil draining from engine is waaaay cleaner than my first flush. Probably won't need to do a 4th time for several changes. I added Ceratec at this change and am amazed how much better the engine performs since my initial flush. Less clatter and very smooth idle. (Jeep 4.0 I6) Update- 2nd change and used the flush again. About 7000 miles from first use. The oil was cleaner and less "gunky" as first time but oil was definitely dirtier than normal. Right away noticed off idle throttle response improved. Then on a drive I take regularly with a mountain pass and long downhill I noticed that even tho the jeep downshifted out of OD it took much less throttle to hold 65 up a long grade. On the downhill normally I would see 50-60 mpg max on the digital readout. This time. It went to 99 which to me indicates more vaccum below the throttle plate. My guess is the rings freed up a bit more than the first flush and highway mileage is up to 23+ where I would get 21 before. Nice! Used in 2001 Jeep Grand Cherokee. 140k miles and a ticking lifter (common in the 4.0 - 6 cylinder...). Definitely cleaned sludge (oil filter very heavy!) and oil was dark when draining. Idles smoother, oil stays cleaner longer, slight oil pressure increase and runs cooler. The lifter still ticks but probably a cam lobe issue. Will use it after 7500 miles or 1 year. Will report back after next change.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2017
J
Verified Purchase
J N Brown
Alexandria, US
★★★★★ 5
Tips and tricks
I watched several videos by professionals who used this. Follow instructions. Make sure the engine is warm before you put it in. Make sure you have everything you need. The biggest tip I got that was repeatedly emphasized by the pros was to buy a “cheap” oil in addition to the new oil. After you run the flush drain the oil and flush. Put the cheap oil in and “rinse” the inside of the engine with the cheap oil. Then drain again. Replace the oil and filter with your good stuff. I followed these instructions or suggestions and…. I sat in the truck while the flush was running. It’s a 13 year old truck with 150,000 miles. It was running strong but burning oil and kind of loud. Sounded like it was growling. There were some ticking type noises that made me nervous. As I sat in the truck and let the flush cycle through the engine at idle I could literally hear the flush working. Very slowly it was like someone gave the engine a Xanax and you could hear it getting quieter and calming down. I drained, rinsed with cheap oil only letting the cheap oil run through at idle for another 15 minutes then drained again. The oil flush was clearly important. It didn’t come out as black as the first drain but it looked like old nasty oil. The truck is no longer burning oil. My gas mileage has increased significantly and it is running so quiet and smooth it’s unbelievable. I used a little less of the liquid Molly flush than it called for regarding the flush to oil ratio. I didn’t want to do something too intense to the inside of the engine. But the results were remarkable. Just as advertised after following the instructions. I also added the liquid Molly oil additive to the final oil change to ‘lube’ the inside of the engine. I plan to do another flush in about 10,000 miles. All that to say, yes, you won’t be disappointed as long as you follow instructions and a few tips and tricks. My truck is almost running like a brand new truck and again it’s an old and tired truck. I will use this as part of a high mileage maintenance and perform the flush every 50,000 miles or so. I feel confident it will extend the life of my engine based on the results
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2024
C
Verified Purchase
ChimChim
Chelsea, US
★★★★★ 4
Seems to have helped
Bought a used 2020 Jeep Sahara 2 liter turbo charged with 80k miles from a dealership. Dealership had just changed oil the day of purchase. Drove it home 30 miles down interstate and another 20 back roads, it ticked and tapped allot at idle and the dip stick was varnished. I added the flush, let it idle for 10 minutes and drained it. The new oil from the dealership drained out jet black, no light could pass thru it. I changed the oil with Walmart oil and a cheap oil filter and let it idle for 5 minutes to clean out all the engine flush, it drained out clean and clear. I refilled it with Pennzoil Platinum High Mileage oil and a Fram Ultra Synthetic oil filter. It's been a week and the engine is noticeably quieter and smoother since using this product. If nothing else it cleaned allot of carbon from inside of my engine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 25, 2025

recommand products