Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
garden sprayer maintenance HBX Handheld Pump SprayerHBX Pump Sprayers Precision, Pressure, and Consistency for Every Grow HBX Pump Sprayers are built for growers who need reliable, high capacity spraying power for foliar feeding, IPM programs, cleaning routines, and general grow room maintenance. Offered in 2 liter, 5 liter, and 8 liter versions, these sprayers deliver smooth, pressurized spraying that saves time and ensures even coverage across your canopy. The 2L model is a compact handheld sprayer,
HBX Pump Sprayers — Precision, Pressure, and Consistency for Every Grow
HBX Pump Sprayers are built for growers who need reliable, high-capacity spraying power for foliar feeding, IPM programs, cleaning routines, and general grow-room maintenance. Offered in 2 liter, 5 liter, and 8 liter versions, these sprayers deliver smooth, pressurized spraying that saves time and ensures even coverage across your canopy.
The 2L model is a compact handheld sprayer, perfect for smaller rooms, targeted applications, and close-up plant work. The 5L and 8L models include shoulder-friendly designs and increased capacity—ideal for commercial facilities, multi-tier setups, and full-room treatments without constant refilling.
Built with HBX durability and grower-focused design, these pump sprayers stand up to daily use, common horticultural chemicals, and the demanding environments of indoor cultivation.
What Pump Sprayers Are Used For
Pump sprayers are one of the most versatile tools in a grower's toolkit. They allow you to:
- Apply foliar feeds with uniform droplet size for maximum leaf coverage
- Administer IPM treatments such as neem, oils, biological controls, or safe pesticides
- Run large-scale sanitation routines with disinfectants or cleaning solutions
- Hydrate media or trays evenly without disturbing roots
- Treat entire canopy zones quickly and efficiently
- Reduce hand fatigue by using pressurized spray rather than continuous trigger squeezing
For medium to large grows, pump sprayers dramatically improve speed, coverage, and consistency.
Why Choose HBX Pump Sprayers
HBX builds equipment specifically for growers, prioritizing durability, comfort, and real-world performance. HBX Pump Sprayers deliver:
- Available in 2L, 5L, and 8L sizes for every grow scale
- 2L handheld design perfect for small rooms, spot treatments, and close-range work
- 5L & 8L high-capacity tanks to treat large spaces with fewer refills
- Strong pressure pump mechanism that produces smooth, consistent spray output
- Adjustable nozzle — fine mist to direct stream
- Chemical-resistant materials ideal for nutrient solutions & IPM formulas
- Comfortable grip & carrying straps on larger models
- Durable seals and components designed for long-term use in humid grow environments
- Trusted HBX quality, engineered for growers who need tools that last
Many generic sprayers fail under daily grow-room use—HBX pump sprayers are built to handle it.
How to Use HBX Pump Sprayers
Using HBX pump sprayers is simple and efficient:
- Fill the tank with your mixed solution using the volume markings as a guide.
- Secure the lid and pump to build internal pressure.
- Adjust the nozzle for your preferred spray pattern.
- Apply evenly across your canopy, walls, trays, or grow equipment.
- Re-pump as needed to maintain steady pressure.
- Rinse after use to extend seal and nozzle life.
The 2L handheld sprayer is ideal for close-range control, while the 5L and 8L units provide extended runtime for full-room applications.
Perfect For
- Indoor tents & home grows
- Large commercial greenhouses
- Foliar feeding programs
- IPM treatments (biologicals, oils, soaps, organic sprays)
- Sanitizing and cleaning tasks
- Media hydration & tray irrigation
- Multi-room or multi-tier environments
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 1719 reviews
Sort
Product Reviews
★★★★★ 5
Works amazingly, but only if you install it correctly.
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you purchasing Siless Liner 157 mil (4 mm) Sound Deadening mat, to block unwanted sounds in your car, this is what you need to buy. But wait! It's not the only thing you need to buy if you want to "actually" deaden sound.
By itself, it will definitely block a noticeable amount of sound, and, most likely, that's all you realistically need. But... But... If you want the Siless Liner Sound Deadening Mat to really help you take it up a few notches, to get the best sound almost bordering on soundproofing, listen up.
You will have to install traditional butyl rubber first. Doesn't have to be the Siless brand, but I'm sure they would love to sell both to you, I used both Killmat (80mil) and Noico (50mil).
I have a Honda S2000. It's a two-seater convertible sports car if you don't know what this car is, and it's loud when I'm driving above 60mph. I also happen to have a sound system installed as well. Other than that, the car is stock. I first installed the butyl rubber on the car's interior sheet metal. I went all out and covered everything I could. I didn't need to but I wanted to. I was extremely impressed with the results. But I wanted to go further. Not because I needed to but because just wanted to see what it would be like.
So I bought Siless Liner 157 mil (4 mm) 36sqft Sound Deadening mat to go on top of the butyl rubber mats. I put this over every area I installed the butyl rubber. I had to be careful of clearance issues since I added a significant amount of underlayment, and you should too.
If you put butyl rubber sound-deadening materials in 50% of the total interior area, you'll hear a noticeable improvement. If you put butyl in about 80% of the total area, you'll be even more amazed at the improvement, compared to before.
I originally did all the above myself, so that's my experience and so your mileage may vary.
I then installed the Siless Liner Sound Deadening mat over every place I could even going further than I could with the butyl rubber. I used the Siles Liner in areas where butyl rubber would not have been effective, such as the roll bar hoop area and large empty cavities or holes.
I covered everything I could, firewall, doors, floor pan, transmission tunnel, trunk, trunk lid, fuel tank area, rear quarter panels, and rear-wheel tunnels, in Siless Liner Sound Deadening Mat.
WOW!! The Siless Liner Sound Deadening Mat was the icing on the cake! Let's not forget, this car is a convertible sports car so it will never be a quiet ride, ever. But I can now actually have a conversation with a passenger at a normal-ish volume! This also means I can now have a normal hands-free phone call without having to plug one ear to block out the noise! My sound system sounds so much better! Just by going through the install process, I looked for any vibration, rattle, squeak, and noise-prone areas to either eliminate or reduce unwanted noise production. If you forget this step, the inside and outside of your car will rattle and buzz. I skipped this step the first time around. But did it right before I installed more butyl rubber and the improvement was impressive, especially inside the car. Outside the car, I didn't notice a difference until I put the last layer of Siless Liner Sound Deadening Mat. The sound deadening mat works both ways from what I can tell. If I turned up my music, as loud as I occasionally do, parked in the attached garage to the house, with the garage door closed, I would be barely able to tell the car was playing music in the garage. It sounds like it is another car, just a little bit down the street, with a very loud base. If you stand 20 feet away outside the car, the sound system is noticeable, but not obnoxious by a long shot.
Get a 3 piece wood/metal roller set as well, which makes quick work of large areas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 23, 2021
★★★★★ 5
Better than Kilmat
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Great adhesion, and you can immediately see the sound difference when you rap the area and compared it to another area without it. Also, very easy to cut and apply. Once on, you may not be able to peel it and reposition it, so be sure where you want it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
★★★★★ 3
Not much noise reduction…
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Easy to install but did not provide much sound dampening…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
Great sound mat for the price!
Style: 50 mil 50 SqFt, Style: 50 mil 50 SqFt
This is a good product. Many people go with KILMAT because of the value to price point. I did as well. When you clean the surface (in my case it was all painted metal) this stuff sticks very well. I do recommend you use a seam roller of some type, I used Lumiteco 3 piece roller set. This will help with adhesion and mostly flatten the overlapped edges. It also helps you see where you have rolled as it leaves little grooves. The difference when we had no sound mats and after was very impressive. We haven't finished our install yet and it is quieter than when we had an interior in the van. There are thicker mats available in other brands, but this will work great for our van build, but this helps keep the weight down. It is quality material, just be careful when you are removing the backing, the edge of the foil face can cut you. I suggest you layout where you are installing the mat and cut to fit. From what I have read, you don't need to cover every inch in the vehicle, just spot install for a big difference. I chose to cover most surfaces to help keep sound out when we are sleeping in the van. We haven't finished putting the van yet, but we have driven it around and been very satisfied with this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
★★★★★ 5
Excellent sound deadening mats
Style: 80 mil 36 sqft, Style: 80 mil 36 sqft
Purchased these for a 2020 Lexus RX350 due to the hollow sound of the car doors when shutting. They sounded cheap. The mats are super sticky and I applied them when the doors were hot from sitting in the sun. They alubutyl sticks like crazy and the end result was perfect. Now I have solid sounding doors. Good quality product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026