SKU: 73468178594
evenflo pivot xpand rain cover

evenflo pivot xpand rain cover Evenflo Shyft DualRide All-Weather Cover

$25.23 $28.03
Save 10%
No.2 Bestseller on piotrzbierski.com >

Pay in installments of $7.01 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 4 - Aug 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

evenflo pivot xpand rain cover Evenflo Shyft DualRide All-Weather CoverShyft into changing conditions with dependable, high quality protection against the elements: the one cover that does it all, our premium, 3 in 1 Evenflo Shyft DualRide All Weather Cover! This hard working cover provides 360 defense against rain, wind, sun and insects, with effortless transitions always ready to help you protect your baby. The first level of protection: a waterproof, durable vinyl rain cover with a clear window, so you can keep your

Shyft into changing conditions with dependable, high-quality protection against the elements: the one cover that does it all, our premium, 3-in-1 Evenflo® Shyft™ DualRide™ All-Weather Cover! This hard-working cover provides 360° defense against rain, wind, sun and insects, with effortless transitions — always ready to help you protect your baby. The first level of protection: a waterproof, durable vinyl rain cover with a clear window, so you can keep your eyes on your baby, along with ventilation for breathability. The second level of protection: a lower rain cover that unzips to provide easy access to your child. The third level of protection: an extended shade for sun protection with a mesh panel to keep insects out, for use with the canopy up. When conditions call for protection, simply slide the cover over your DualRide and in seconds you’ll have perfectly fitted, all-weather coverage in place. Elastic at the front and back, plus elastic loops on the sides, hold the cover secure. Our smart and stylish All-Weather Cover is designed to integrate with your Shyft DualRide Infant Car Seat and Stroller Combo and features an eye-catching raindrop design on the sides. With safety in mind, reflective trim helps to add visibility in high traffic or low light. When you’re done with it, the cover removes with ease from your DualRide and collapses flat to just 12 in. across and 2 in. deep. Pop it into the included round polyester storage bag and snap it onto the handle of your DualRide stroller. The durable cover stands up to the elements and can be spot-cleaned as needed, so it’s fresh and ready to go for your next outing.

For 100 years and counting, Evenflo continues to push the boundaries in baby and children’s gear design and innovation. We meet the needs of new generations of parents by focusing on what they really care about: leading-edge safety, smart design and technology, and convenient features that help them enjoy the journey of parenthood.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 73468178594

Discover Niche Categories That Outsell evenflo pivot xpand rain cover

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 20 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Belleville, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
A
Verified Purchase
Andy Sims
Fort Morgan, US
★★★★★ 5
better then expected
Color: Black
very easy to put together works perfectly! very stable for the side would buy again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
Y
Verified Purchase
Yuliet carreño cutiño
Charlottesville, US
★★★★★ 3
Divisor de habitaciones
Color: Black
La entrega fue perfecta , si debo de decir que en la descripción del producto decía que media 72 ancho x 72 alto pero no fue así su ancho es de 60 .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2025
N
Verified Purchase
Nana rice
Charlottesville, US
★★★★★ 5
Good purchase
Color: Black
We used this screen to divide the beds at a hotel. It gave the perfect privacy, was easy to put up and very sturdy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
K
Verified Purchase
Kaylin
Lowell, US
★★★★★ 1
Would not recommend
Color: Black
Product was terrible, it was not sturdy at all
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026

recommand products

Prowl H2O Herbicide
27.17
Dessicash Aquatic Herbicide – Fast Non-Selective Weed Control
28.36
Certis Biologicals Homeplate Organic Non-Selective Herbicide, 2.5 Gallons
21.10
Pathfinder II — Chemical Warehouse
24.22
Doom Non-Selective Weed Killer Spray 16.5 oz Aerosol – Lawson Products
27.78