SKU: 81553019348
small succulent with pink flowers

small succulent with pink flowers Shop 'Pink Ice plant Succulent - Oscularia deltoides' Care and Growing Guide

Sale price$24.26 Regular price$26.96
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

small succulent with pink flowers Shop 'Pink Ice plant Succulent - Oscularia deltoides' Care and Growing GuideIntroducing the Pink ice plant, known as Oscularia deltoides, which is a trailing succulent with pink flowers. Native to South Africa, this low maintenance succulent makes great ground cover and spreads out, forming a colorful mat, and grows well on the rocky edge. Additionally, this pink ice plant can be grown in pots too. The name "ice plant" refers to tiny hairs on the plant's leaves and stems that reflect light in the same way that ice crystals

Introducing the Pink ice plant, known as Oscularia deltoides, which is a trailing succulent with pink flowers. Native to South Africa, this low-maintenance succulent makes great ground cover and spreads out, forming a colorful mat, and grows well on the rocky edge. Additionally, this pink ice plant can be grown in pots too.

The name "ice plant" refers to tiny hairs on the plant's leaves and stems that reflect light in the same way that ice crystals do. The foliage is fleshy and succulent-like, and it darkens as fall temperatures drop. Although ice plants are cold-sensitive, many varieties are evergreen in warm, dry climates.

Ice plants are used in sunny but sheltered desert gardens, rock gardens, slopes, ground cover, and as edging plants.

It is also known as Lampranthus Deltoides, Deltoid Leaved Dew Plant, Tooth-leaf Rock Vygie, Dassievygie, and Sandsteenvygie.

With its small, plump leaves that boast a mesmerizing blue-green hue, this ice plant is sure to turn heads and add drama to any space.

The three-sided leaves of the ice plant are fat and trailing.  The color becomes more intense as the pink ice plant ages and is exposed to more sunlight. It can grow up to 1 foot tall and 2 feet wide.

The ice plant flowers bloom during the late spring to summer, with bright pinkish-purple and dazzling magenta-pink flowers. They bloom from every nook and cranny until they completely surround and cover the whole plant. This stunning ground covered with pink flowers is closed up in the morning but open, often to cover the plant, in the afternoon. 

The true beauty of this trailing plant is that it can withstand high temperatures and extreme environmental conditions without showing signs of stress. It attracts butterflies.

Leaf cuttings and stem cuttings are the easiest way to propagate these ice plant ground cover. 

When and How to Water Your Ice Plant 

The ice plant is a succulent that prefers well-draining soil and requires watering only when the soil is dry to the touch. Overwatering can cause root rot and other issues that can damage these pink plants. They can be watered year-round and water regularly from spring to Autumn but reduce the watering frequency in winter; the growth period is early Spring to late Summer. 

When watering the pink ice plant, it is important to avoid standing water and to ensure that the soil is able to dry out between watering sessions. The pink ice plant is well-suited to dry climates and can tolerate periods of drought, but it does require a lot of water to thrive. 

Remember, watering should be done at the base of the succulent ice plant rather than from above to avoid getting water on the leaves, which can cause damage or rot. With proper watering and care, the pink ice plant can thrive and produce colorful blooms that are sure to brighten up any garden. 

Light Requirements - Where to Put Ice Plant

Like many other succulents, the ice plant is sun-loving and also requires direct, bright light to thrive.  When grown indoors, place it in the sunniest place in your house. It is ideal to grow this pink flower ground cover in a west- or south-facing window, when it can get 4-6 hours of bright sunlight. 

For outdoor cultivation, these oscularia deltoides require full sun to partial shade for at least 6-8 hours of strong light each day. Although light shade in the afternoon is often preferable - especially in hotter climates where the plant might become stressed by the intense heat of the afternoon sun. It's crucial to place your pink plants away from any areas with constant direct sunlight, as doing so could result in burned foliage. 

Remember, when planting the pink ice plant, it is important to choose a location that receives full sun throughout the day to maintain its colors. It is well-suited to hot and dry climates and can tolerate high temperatures and intense sunlight. 

This pink ice is able to tolerate some shade, but it may not produce as many blooms in areas with less sunlight or in too much shade. With proper light and care, the pink ice plant can thrive and produce beautiful blooms that are sure to add color and interest to any garden or landscape. 

Optimal Soil & Fertilizer Needs 

The ice plant favors very airy, sandy soil that drains well. Planting them in ordinary soil will result in compacted roots, stunted growth, and, most likely, root rot. Instead, make or buy a well-draining potting mix, or ideally, use our specialized potting mix that contains 5 natural substrates and mycorrhizae to promote the development of a strong root system that helps your succulent to thrive. 

When it comes to fertilizer, the pink ice plant does not require a lot of additional nutrients. In fact, too much fertilizer can cause the plant to produce excessive foliage at the expense of blooms. A slow-release natural fertilizer with an equal mix of NPK (5-10-5) can be applied once a year in the spring to help provide the plant with the nutrients it needs to thrive. Care should be taken to avoid over-fertilizing the succulent plant, as this can lead to issues with growth and blooming. 

With proper soil and fertilizer, the ice flower plant can thrive and produce beautiful blooms that are sure to add color and interest to any garden or landscape. 

Hardiness Zones & More 

When growing indoors, it should be kept between 65-75 degrees Fahrenheit to ensure optimal growth. The requirements are fairly flexible, as it can tolerate a wide range of temperatures. However, it is best to keep it in a warm environment with plenty of sunlight to encourage healthy growth.

For outdoor cultivation, this hardy ice plant is suitable outdoors in USDA zones 8-11, making oscularia deltoidesa a versatile plant that can be grown in a variety of climates. However, it is important to ensure that the succulent plants receive enough water to prevent issues with dehydration. 

The ice plant is able to tolerate mild frost, but it may struggle in areas with prolonged periods of frost or freezing temperatures. The best way to grow these pink ground covers is in containers, especially for those who live in regions with harsh winters.  

When it's cold outside, or there is a chance of snow or frost, you can then bring them inside. There are ways to keep your pink ice plant succulent safe from the cold if you are unable to bring it inside.To help them endure the harsh winter, you can use frost cloths or tiny greenhouses. 

Final Thoughts

Overall, the Pink Ice plant Succulent (Oscularia deltoides) is a beautiful and low-maintenance plant that adds a pop of color to any garden or indoor space. With its unique triangular-shaped leaves and ability to thrive in dry conditions, it is an excellent choice for beginner gardeners or those looking to add a touch of vibrancy to their collection. Remember to provide well-draining soil, ample sunlight, and occasional watering to keep this succulent happy and healthy.

Be sure to add Oscularia deltoides - Pink ice plant, to your collection today and elevate the beauty of your home or garden with this stunning-looking plant.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 81553019348

Discover Niche Categories That Outsell small succulent with pink flowers

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 1464 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
L. Yu
Dallas, US
★★★★★ 4
pretty good banana plugs
Size: 5 Pack, Pattern Name: Banana Plugs
i bought these over 6 months ago and i just installed them to the front left and right floor standing speakers - sony ssf-7000 i have them for over 10 years hooked up to a yamaha 7.1 AVR. alot of people have had trouble installing this - one single banana plug comes in 3 parts - the bottom and top (the banana plug tip) can be unscrewed. what i did was tightened the top first (top being the tip of the banana plug) then unscrew the bottom off completely - make sure you have like 3/4" - 1" (depending on your gauge of wire) of exposed speaker wire that is straight - then thread it through the hole at the bottom up - i then rolled the exposed 3/4 - 1" exposed copper wiring into a ball that is bigger than the hole of the banana plug bottom piece so the wire doesn't fall back through where it came from. then i screwed on the top and middle piece back with the bottom piece - tightening it a bit so i know there's good contact. also make sure the tip is screwed in all the way as well as a double check. what you don't want to do is have the copper wire touch the threaded part of the bottom piece - the wire will cut off from the screwing action. i plugged it into my sony speakers and it wasn't a real snug fit - a bit too loose to feel secure - it didn't seem to go all the way in - but it fit fairly well in my receiver. my intention was to use these banana plugs with my 2 channel set up but i decided to go pre-constructed mediabridge 12 AWG speaker cable instead - those fit my 2 channel set up on my receiver and elacs really snug and secure. i tested it and it works fine. i didn't hear any loss of signal or any extraneous noise. none of my (14 awg?) wiring fell through the bottom and it sounds good. so no complaints there. i bought 5 pairs - but i find that it is an odd number to include a package - even numbered pairs would be better. anyway they seem constructed well - easy enough to install and they do work. thanks for reading
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 12, 2019
A
Verified Purchase
AB
Bozeman, US
★★★★★ 5
High quality and robust
Size: 12 Pairs, Pattern Name: Banana Plugs
Easily the best plugs I've found at a reasonable price. Solid feeling with good quality and they look good with easy to see red/black labeling. The tips tend to unscrew too easily, but this is a non-issue when they are in use, just something you have to be careful not to lose when assembling. It's a bit tricky to spread the wire out evenly at the exact right length. If screwing the plug together is hard at all, go back and shorten how much wire you bend over the lip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 16, 2025
W
Verified Purchase
William
Alexandria, US
★★★★★ 5
Solid banana clips
Size: 5 Pack, Pattern Name: Banana Plugs
Ah yes, I used these solid banana plugs to convert my wires. It’s pretty easy to set up once the wire housing has been stripped and really cleans things up nicely. I haven’t had any discernable hissing, noise problems, or connection issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
L
Verified Purchase
Leyland Cypress
Louisville, US
★★★★★ 3
Get the right wire guage
Size: 1 Count (Pack of 1), Pattern Name: Banana Plugs
I rate the banana plugs themselves 4 stars. They are everything I expected and work as advertised. It's the experience of assembly that I rate three stars. The way these work is -- you strip off the outer insullation of your wire and separate the two leads (positive and negative). Then you strip some length of insulation off the end of one of your leads, you unscrew the banana plug so that it separates into its respective base (lower) and contact (upper) halves, you slip the wire up through the base, you flare the copper strands of the wire and fold the individual strands over the very top of the base (about 1/16 of an inch) (taking care not to extend the strands over the threaded barrel of the base), then you screw the upper contact onto the lower base and voila, banana plug / wire assembly. It's not as complicated as it sounds. Go to the Monoprice website and watch their excellent instructional video. Here's the thing though. While the assembly is not complicated, it is tricky, and if you don't get your proportions right the first or second or third time, you'll have to do it over. Fist of all, if your wire guage is relatively thin, like my 16-guage speaker wire, you'll find that the entire wire, insullation and all, will slip right through the base of the plug without butting up against the bottom of the base. If this is the case, then the wire is left to sort of flop around inside the plug and that has a kind of unfinished, amateur look and feel to it, whereas if the wire butts up against the bottom of the base, it has a solid, one-piece professional look. So, to my mind, there's a sweet-spot for wire guage that works best with this plug -- not too thin and not too thick. And since Monoprice has debunked the thicker-is-better myth (the quality of the copper is the real determinant), then you should feel free to get the wire guage that fits the plug. Next -- and here's where it gets tricky -- once your copper extends beyond the top of the base, you'll need to limit this extension to about a sixteenth (no greatrer than a fourth) of an inch. Then you very delicately flare out the individual strands, in a 360- degree arc, and fold the strands over the top of the base. This takes a fair degree of manual dexterity, especially if the wire is "floating" inside the base and its travel is not stopped where the insullation meets the base. You'll have to hold the wire and base steady in the fingers of one hand, then flare out the wire strands with either your fingers or a suitable object (the working end of a ball-point pen worked for me) with the other hand. This one-sixteenth measure is important. If you extend wire strands beyond the top and over the threads of the base, you'll find that screwing the contact end onto the base is impossible and you'll need to start over. One or two strands is OK and almost unavoidable. In that case the screwing will catch but if you take a pair of pliers to it you can muscle through. By the way, you can avoid the whole mess by getting the open-screw type, which I'm sure will work just as well without any of the hassle of assembly. Like anything else, if you do it a few times to make the mistakes and learn the tricks, then it will become second nature, and if you've already done that, then my review might seem overly fussy. In that case feel free to leave comments to help other readers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 15, 2012
J
Verified Purchase
JBDoge
Lowell, US
★★★★★ 5
Wish they came with instructions...
They are cheap and work great. They plug right into my Pioneer vsx521 receiver and my Paradigm Atom monitor speakers. I wish they came with instructions, because it took me about 10 minutes to realize the bottom part unscrews in addition to the top part. Here are my instructions for installation: 1) Unscrew the bottom part of this connector (the thin metal underneath the red/black ring). 2) Make sure the Banana Plug (which may be loosely screwed into the top part of the connector) is fully tightened down 3) Strip your wire tips to 3/8 of an inch (or just slightly under) 4) Run the first newly stripped wire end through the bottom part you removed in step 1, such that the stripped end of the wire is entering through the flat end and exiting through the smaller threaded end. 5) Leave about 1/8 to 3/16 of an inch of stripped wire hanging past the exit hole. 6) As evenly spaced as possible, bend the over-hanging wire strands over the exit hole (all around it, like a hat). If done properly, the wire should not fall out if you give it a VERY GENTLE tug. 7) Screw the top metal part (with the actual banana plug) back onto the bottom part. It may be difficult if your stripped wire is hanging too low. I've used a pair of pliers to grip the bottom part of the connector while I twist the banana plug side with my hand. If done correctly, you should be able to put a lot of tension between the wire and connector without removing/damaging it. UPDATE: I just recently helped my dad install his 5.1 system without these... it sucked... This item (5 pairs of them in this case) and a good wire stripper can save you alot of pain (both physical and mental). The connectors on the back of his receiver are the kind where bare wire comes in from the side and then the connectors screw down (with a banana plug hole in the center which is where this product would come into play). I felt like a surgeon trying to get a bare wire end into the little slot, and then holding it there while I tighten the connector which is almost impossible since they are so close together... GET THESE!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2012

recommand products