SKU: 84901907688
philodendron jose buono fiesta

philodendron jose buono fiesta Philodendron 'Jose Buono' – Foliage Factory

Sale price$25.79 Regular price$28.65
Save 10%

Pay in installments of $7.16 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 6 - Aug 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

philodendron jose buono fiesta Philodendron 'Jose Buono' – Foliage FactoryPhilodendron 'Jose Buono' Philodendron 'Jose Buono' is a large leaved variegated Philodendron grown for thick, oval to elongated leaves marked with cream, yellow green, and deep green marbling. Mature leaves can become broad and substantial, with a heavier texture than many narrow leaved variegated Philodendrons. Each leaf develops its own balance of colour, so one plant may carry fine speckling, broad pale sectors, and cleaner green leaves at the

Philodendron 'Jose Buono'

Philodendron 'Jose Buono' is a large-leaved variegated Philodendron grown for thick, oval to elongated leaves marked with cream, yellow-green, and deep green marbling. Mature leaves can become broad and substantial, with a heavier texture than many narrow-leaved variegated Philodendrons. Each leaf develops its own balance of colour, so one plant may carry fine speckling, broad pale sectors, and cleaner green leaves at the same time.

The plant develops a thick climbing stem with active aerial roots. A vertical support gives the nodes contact points and helps mature leaves sit better as they enlarge.

  • Growth habit: Climbing Philodendron with aerial roots and a stem that benefits from a moss pole, coir pole, or similar support.
  • Leaf shape: Thick, oval to elongated leaves with a broad surface and a firm feel as the plant matures.
  • Variegation: Cream, yellow-green, and green markings vary naturally from leaf to leaf.
  • Container behaviour: Can produce larger leaves indoors when the root zone stays airy and the stem has support.

Thick oval leaves on a climbing stem

A pole or similar support keeps the stem upright and gives aerial roots a surface to attach to. This matters most once the leaves become heavier and the vine starts carrying more mature growth.

The variegated areas contain less chlorophyll than the green parts of the leaf, so the plant depends on healthy roots and enough green tissue for steady growth. Large pale sectors are attractive, but they are also more sensitive to harsh sun, heat, and inconsistent watering.

Light, water and support for Jose Buono

  • Light: Give bright filtered light. Direct midday sun can scorch pale variegated sections, especially on newer leaves.
  • Watering: Water when the upper 3–5 cm of substrate feel dry. Rehydrate the root ball evenly, then let excess water drain fully.
  • Substrate: Use a chunky aroid mix with bark, coco chips, perlite or pumice, and a modest moisture-holding component.
  • Humidity: Moderate to high humidity supports smoother unfurling, especially while large new leaves are expanding.
  • Temperature: Keep it warm, ideally around 20–28°C. Avoid cold wet substrate, which can damage active roots.
  • Support: Tie the stem loosely at the nodes and guide aerial roots toward the pole before the vine becomes heavy.
  • Feeding: Feed lightly during active growth with a balanced fertiliser. Heavy feeding can mark pale leaf tissue and stress the roots.

Leaf marks, small growth and root stress

  • Brown marks on pale sections: Check sun exposure, dry air, and heat near windows. Move the plant into filtered light and stabilise moisture.
  • Small new leaves: Check whether the stem has support, whether roots are active, and whether light is strong enough for climbing growth.
  • Soft yellowing leaves: Check for wet, compacted substrate. Let the mix dry slightly further and improve aeration if drainage is poor.
  • Distorted new growth: Inspect the newest leaves and cataphylls for thrips or mealybugs, then isolate and treat promptly if pests are present.

Pet and child safety

Philodendron 'Jose Buono' is not pet-safe. Like other Philodendrons, it contains calcium oxalate crystals that can irritate the mouth, throat, stomach, and skin if chewed or handled roughly. Keep it away from pets and children, and wash your hands after pruning or removing damaged leaves.

Family and name background

Philodendron belongs to the Araceae family, with a native range across tropical America. The genus name comes from Greek roots commonly translated as “loving” and “tree,” a reference that fits many climbing Philodendrons with aerial roots.

Philodendron 'Jose Buono' develops thick oval leaves, cream-green marbling and a climbing stem that can be trained upward.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 84901907688

Discover Niche Categories That Outsell philodendron jose buono fiesta

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 12 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Joseph E. Brackman
Omaha, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
R
Verified Purchase
Russel
Natrona Heights, US
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
C
Verified Purchase
Colauhu
Omaha, US
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
G
Verified Purchase
Gigi
Los Angeles, US
★★★★★ 5
Great legs - sturdy when fully assembled with tabletop.
Size: H Desk Unfinished 3/4-in and 1/2-in
These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 4, 2020
M
Verified Purchase
Michelle bullard
Lowell, US
★★★★★ 5
Stable and easy to assemble
I used these to support a heavy piece of countertop would to create a side table. Looks great and holds steady.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2023

recommand products