SKU: 91832195397
order a snake plant

order a snake plant Buy Mother in Laws Tongue Phoenix, AZ | Sansevieria

Sale price$21.11 Regular price$23.45
Save 10%

Pay in installments of $5.86 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 17 - Jul 22

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

order a snake plant Buy Mother in Laws Tongue Phoenix, AZ | SansevieriaThe Toughest Indoor Outdoor Plant for Phoenix Homes Mother in Law's Tongue Mother in Law's Tongue (Sansevieria trifasciata) is the single most indestructible plant you can grow in the Phoenix Valley. This upright, sword leafed succulent thrives in full sun patios, shaded entryways, bright indoor rooms, and dim office corners it simply does not care. Native to tropical West Africa, Sansevieria has adapted to survive extreme drought, low light, and

The Toughest Indoor-Outdoor Plant for Phoenix Homes — Mother in Law's Tongue

Mother in Law's Tongue (Sansevieria trifasciata) is the single most indestructible plant you can grow in the Phoenix Valley. This upright, sword-leafed succulent thrives in full sun patios, shaded entryways, bright indoor rooms, and dim office corners — it simply does not care. Native to tropical West Africa, Sansevieria has adapted to survive extreme drought, low light, and total neglect, making it the perfect choice for busy Scottsdale homeowners, Mesa rental properties, Gilbert office lobbies, and Chandler covered patios where other plants give up.

Mother in Law's Tongue Plant Details

Attribute Detail
Scientific Name Sansevieria trifasciata (syn. Dracaena trifasciata)
Common Names Mother in Law's Tongue, Snake Plant, Sansevieria, Saint George's Sword
Mature Height 2–4 feet
Mature Width 1–2 feet (clumping, spreads by rhizomes)
Growth Rate Slow to moderate — 2–4 new leaves per year
Sun Full sun to deep shade. Tolerates any light condition.
Water Very low. Extremely drought-tolerant. Overwatering is the #1 killer.
USDA Zones 9–12 (Phoenix is Zone 9b–10a — protect from hard frost below 32°F)
Soil Well-draining required. Adapts to Arizona caliche soils with added sand or gravel.
Foliage Evergreen — stiff, upright sword-shaped leaves with green-yellow variegation
Bonus NASA-proven air purifier — removes formaldehyde, benzene, and xylene

Mother in Law's Tongue Uses in Phoenix Landscapes

Covered Patios & Shaded Entryways

Mother in Law's Tongue is the top pick for Phoenix covered patios, north-facing entries, and shaded courtyards where most plants struggle. The upright, architectural form adds clean modern lines to outdoor living spaces in Scottsdale, Paradise Valley, and Chandler. Group 3–5 plants in matching pots for a designer-look patio border, or plant directly in a shaded landscape bed along a covered walkway.

Indoor Accent & Office Plant

Snake Plant is one of the few plants that actually thrives in air-conditioned indoor environments. Place it in a bright window, a dim hallway, or a fluorescent-lit office in Mesa or Tempe — it performs in all conditions. Its air-purifying qualities make it a smart choice for bedrooms, home offices, and commercial lobbies across the Phoenix Valley.

Modern Desert Container Plantings

The bold vertical leaves of Sansevieria look striking in sleek concrete, ceramic, or metal planters. Use a single large specimen as a patio focal point, or line up matching containers along a Gilbert pool fence or Peoria outdoor kitchen. Container planting also makes it easy to move indoors during rare hard freezes.

Low-Maintenance Ground Cover & Border

Planted en masse in a shaded landscape bed, Mother in Law's Tongue creates a dense, low-water ground cover that never needs mowing. Space 12–18 inches apart for a filled-in border within 2 seasons. Works beautifully under Desert Museum Palo Verde trees or along shaded property walls.

Best Time to Plant Mother in Law's Tongue in Phoenix

Spring (March–May) is the ideal planting window. Warm soil and long days fuel rapid root establishment. Fall (October–November) is the second-best option. Avoid planting outdoors in winter — Sansevieria is frost-sensitive and should be protected or brought inside when temperatures drop below 32°F.

How to Plant Mother in Law's Tongue

  1. Dig wide, not deep — 2x the root ball width, same depth. Sansevieria has shallow rhizome roots.
  2. Ensure drainage — break through any caliche layer. Add coarse sand or perlite if soil holds water.
  3. Backfill with native soil — a 50/50 mix of native soil and coarse sand is ideal for in-ground planting.
  4. Spacing — 12–18 inches apart for a border or mass planting; 2+ feet for standalone specimens.
  5. No water basin — Sansevieria prefers to dry out quickly. Skip the soil ring.
  6. Gravel mulch — 2 inches of decomposed granite. Avoid organic mulch that traps moisture against the base.

Watering Mother in Law's Tongue in Phoenix

First Year Watering Schedule

  • Weeks 1–2: Water once, deep soak, then let soil dry completely before watering again (5–7 days).
  • Months 1–3: Every 10–14 days in warm months.
  • Months 4–12: Every 2–3 weeks. Let the top 2 inches of soil dry between waterings.
  • After Year 1: Every 3–4 weeks in summer; monthly or less in winter. Outdoor plants in shade may need no supplemental water in winter.

Drip Irrigation

Place 1 emitter (0.5–1 GPH) 6 inches from the base. Sansevieria is far more likely to die from overwatering than underwatering. If leaves turn mushy or yellow at the base, you're watering too much. When in doubt, skip a cycle. Indoor plants in pots should be watered only when soil is completely dry — typically every 2–4 weeks.

Can Mother in Law's Tongue survive outdoors in Phoenix year-round?
Yes, in most of the Valley. It thrives outdoors in covered, frost-protected areas. During rare hard freezes (below 32°F), either cover the plant with frost cloth or move containers indoors. In most Phoenix winters, it handles outdoor conditions just fine.

Is Snake Plant toxic to pets?
Yes, Sansevieria is mildly toxic to dogs and cats if ingested. It typically causes nausea and vomiting. If you have curious pets, place the plant on an elevated surface or choose a pet-friendly alternative.

How do I propagate Mother in Law's Tongue?
The easiest method is division — separate the rhizome clumps when repotting. You can also propagate from leaf cuttings placed in well-draining soil, though this takes 2–3 months to root. Division gives you an instant new plant.

Why is my Snake Plant not growing?
In Phoenix, the most common reasons are overwatering (causes root rot) and too much direct summer afternoon sun (causes leaf burn). Move to bright indirect light or morning sun, reduce watering, and growth should resume in spring.

You May Also Like

  • Elephant's Ear — bold tropical foliage for shaded Phoenix patios and entryways.
  • Flapjacks — another tough succulent with dramatic paddle-shaped leaves that pairs well with Snake Plant.
  • Blue Elf Aloe — a compact, colorful aloe that thrives in the same containers and landscape beds.
  • Ponytail Palm — an architectural indoor-outdoor plant with similar indestructible qualities.
  • Firestick Euphorbia — adds vivid color contrast next to Snake Plant's green-yellow foliage.

How Many Mother in Law's Tongue Do I Need?

Snake Plant clumps stay narrow, just 1 to 2 feet wide, and spread slowly by rhizome, so it is planted in groups for a border, a mass bed, or matching containers. Space plants 12 to 18 inches apart and they knit into a filled border within about two seasons. Use this table to size a shaded bed or border run.

Border / bed length Spacing 12 in Spacing 18 in
10 ft 10 plants 7 plants
20 ft 20 plants 14 plants
Container cluster 3 to 5 plants per large pot for instant fullness

Mother in Law's Tongue Season-by-Season in Phoenix

  • Spring (Feb to Apr): Best planting window. Warm soil and long days push 2 to 4 new upright leaves and any rhizome spread for the year.
  • Summer (May to Sep): Thrives in heat under cover or bright shade. Direct west afternoon sun can scorch the leaves, so give it morning sun or filtered light. Monsoon humidity is fine as long as the soil drains and the base dries out between waterings.
  • Fall (Oct to Nov): Good secondary planting season. Growth slows as nights cool.
  • Winter (Dec to Jan): This is the one weak spot. Sansevieria is frost-sensitive and leaves turn mushy below about 32F. Cover with frost cloth on freeze nights or grow it in pots you can pull under cover or indoors.

At a Glance

✔ Drought-Tolerant   ✔ Evergreen   ✔ Low-Maintenance   ✔ Pool-Friendly (Low-Litter)   ✔ Fire-Wise   ✔ Deer & Rabbit-Resistant   ✔ Spineless

Plant It With

  • African Spear: a cylindrical Sansevieria cousin that layers texture in the same shaded bed.
  • Elephant's Ear: bold broad foliage for a tropical, shaded-patio pairing.
  • Flapjacks: paddle-shaped succulent that contrasts the upright sword leaves.
  • Ponytail Palm: another tough, sculptural indoor-outdoor plant with the same care needs.

Is Mother in Law's Tongue Right for Your Yard?

Snake Plant is ideal for covered patios, north entries, shaded courtyards, and indoor rooms anywhere in the Valley, in fast-draining soil or a pot where the roots dry out between waterings. It is not a fit for an exposed west-facing bed in full afternoon sun, a low spot that stays wet, or a frost-exposed location you cannot cover in winter. It is also mildly toxic to pets if chewed, so keep it out of reach of curious dogs and cats.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 91832195397

Discover Niche Categories That Outsell order a snake plant

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
Kindle Customer
Battle Creek, US
★★★★★ 2
Not worth it
Size: C20
In the beginning I thought this vacuum was great. The longer I use it the more annoyed I am. At this point I often find myself using my old cannister vacuum or broom and manually mopping despite having a several hundred dollar appliance that is supposedly nearly autonomous in these tasks. Customer service has been mostly useless and often concludes the vacuum is working as it should. If this is the best it is intended to work, that's an issue. Here are the problems I've noticed: 1. Many moving parts on the underside of the robot end up winding up human hair and other debris. In most of these places, it isn't possible to disassemble to the point of easily pulling out the hair. I desire to run the vacuum once weekly for a ~1400 sq ft apartment and at this rate, once or twice a month I need to be picking at the component parts with the tip of a knife to try to wrestle the hair tourniquets off of where its wound up. If I don't do that, the vacuum is incredibly squeaky and loud. 2. Debris accumulates in the base station tray and clogs it up such that base station needs to be cleaned regularly or else the mops stay too wet and do not dry. Again this is a once or twice per month task. Otherwise you could run an entire dry cycle on the mops and still come out with soaking wet mops. Do I remember to check the mops every time to make sure they did indeed dry? No, so then soggy nasty mops sit there for a long time. Kind of defeats the purpose of self washing and drying. 3. Possibly related to the above or not, I really can't tell -- the mops start out too wet and leave little puddles that dry into unsightly water spots on the floor when it first begins mopping. Then it quickly loses all water and seems to be doing basically nothing. Adjusting the frequency of return helps slightly with the second problem but not the first, and I end up passing over with a manual mop every time to clear standing water and eliminate water spot stains. 4. Poor emptying of dustbin resulting in poor suction and accumulation of debris at the site of the base station. Seriously, half the time even on turbo suction this vacuum LEAVES more dust on rugs in its wake than it picks up. I can clean my doormat better with a quick sweep with the broom. When it gets back to the base station to empty, half the time it flings debris out from the base station at high speed and I have to sweep up its mess. Manually emptying the on-board dust bin helps, but isn't supposed to be necessary -- this thing is allegedly self emptying and certainly makes quite enough sound during the emptying phase to have you believe it is emptying the dustbin. Add one more once or twice monthly maintenance requirement that isn't supposed to be needed. 5. Dustbunnies, rather than getting sucked up, attach to various parts of the bottom of the vacuum contributing to other problems described above. As soon as it goes over a rug, the rug pulls all the dustbunnies off, now they are on your rug instead of the wood floor. If the vacuum makes it back to the base station with the dustbunnies attached, now they are clogging up the mop tray. 6. Sometimes cannot figure out how to reseat itself at home base. It finds the base station, then just gets stuck in a loop of rearing up and heading towards it and missing. I have to sometimes out it back to charge manually. All in all, it really needs a lot of attention for what is meant to be a pretty independent machine. Customer service flat out told me the mopping is functioning as expected. Gross, I don't know why you would think any customer wants puddles of water left behind that can damage wood floors or leave unsightly stains, but ok. Only ever offered to send a replacement vacuum if I pack this one up to return. If it's working properly, I don't want a replacement, I want a refund! Let me go back to my old cannister vacuum and hand mop in peace. Maybe the models at higher price points are better without these issue; I wouldn't know. Edited to add, the manufacturer reached out to me and was able to set me up to try out the S1 ad an alternative due to these concerns. I am bumping the review from one star to 2 for the strong customer service. In my opinion, the S1 is a much stronger performing vacuum/mop combo.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2025
K
Verified Purchase
Kayla P
Houston, US
★★★★★ 5
Good buy
Works well with my Eufy C10, very easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 26, 2026
C
Verified Purchase
Cory the person
Bozeman, US
★★★★★ 1
Filter is too small for full coverage
Filters are not the correct size, too small. Not worth the risk. Brush arm bristles were also all bent up.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
I
Verified Purchase
Ipad_user_2
Fort Morgan, US
★★★★★ 2
Filters are the wrong size for the Eufy C10 vacuum
The air filters are smaller than the stock air filter. They will probably work if they are stretched out a bit, but as delivered, are unacceptable. The roller and the sweeper are good. Poor filter fit. Original filter size: 1.75 inch by 3.65625 inch. The filters in this set are 1.25 inch by 3.5 inch. Too small.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
M
Verified Purchase
meghan
Draper, US
★★★★★ 5
Everything fits
All the parts fit and was a great deal
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026

recommand products