Size:
4
Pay in installments of $5.67 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 3 - Jul 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
vintage yellow dress 1950s Pale Yellow Embroidered Patio Dress | Pleated Full Skirt | PinupAdorable 1950s yellow patio dress with spaghetti straps, a fitted bodice, and micro pleated full skirt and embroidered all over! Label: Aywon Originals New York The dress was photographed with a crinoline underneath, the crinoline is not included with the listing. The dress is lined and zips up the rear with a metal zipper. The lining is stitched down at the bust and full at the skirt to accommodate a crinoline. It also closes at the waist with a hook
Adorable 1950s yellow patio dress with spaghetti straps, a fitted bodice, and micro pleated full skirt and embroidered all over!Label: Aywon Originals New York
The dress was photographed with a crinoline underneath, the crinoline is not included with the listing.
The dress is lined and zips up the rear with a metal zipper. The lining is stitched down at the bust and full at the skirt to accommodate a crinoline. It also closes at the waist with a hook and thread, the thread loop is missing so the hook does not close.
Condition - See images
*Small spot on bodice - I have not attempted to clean
*Small spot on skirt in front - I have not attempted to clean
*Some loose areas of the embroidery primarily on the rear bodice
*Stitching connecting the two spaghetti straps to each other on one side are coming undone
*The thread loop for the hook at the waist in the rear is missing so the hook does not close
Measurements:
Bust 33" to VERY sung 34"
Waist 26"
Hips Full
Length 39"
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 1894 reviews
Sort
Product Reviews
★★★★★ 5
Works for my 2011 115hp Etec
Size: For 75-250 HP
Exact fit and cheaper than a trip to a repair shop. Make sure you have the proper gasket sealer, a good scrapper that's not going to dig into the sealing surface, and tools for the job.
I went on my computer and downloaded a video that walked me through the process. I'm a mechanic by trade but wanted to ensure everything was correct. I've been running the motor now for a couple of months. Peeing just as it's supposed to.
No more delivering, waiting, and retrieving my boat from the shop for its routine service.
Just follow your owner's manual to make sure you do all the necessary maintenance.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2025
★★★★★ 5
Great replacement
Size: For 5.5HP 6HP 7.5HP
Works as it should. Easy to swap out.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 12, 2025
★★★★★ 5
Works
Size: For 60 65 70 75 HP
Works great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
★★★★★ 4
Great product
Size: For 85-300 HP
Complete rebuild kit for $38 and great quality and fast delivery
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 30, 2025
★★★★★ 5
If pump doesn't seem to work
Size: For 85-300 HP, Size: For 85-300 HP
Hi....I apologize it took me a while to get back to you with my results. Here is what I discovered about the pump and will also apply to some of the other comments I read in the reviews with people not getting the pump to work:
1.) I removed the pump to check the proper direction of the impeller and it was correct as can be seen in the photo.
2.) I built a pump shaft attachement so that I could operate the pump with a power drill.
3.) I attached the water muff to the unit and tried to pump water.....it wouldn't do so. What I did see however was that even at high hose discharge and small leakage at the muff I could not fill the water cavity in the housing.
4.) I installed a strap around the muff and tightened it very tight and THEN at high hose pressure I was able to get the cavity to fill with water.
5.) At that point I activated the drill and was able to get the pump to actually pump water. I then removed the pump housing and removed the O-Ring that resides on top of the impeller, reassembled and it would not pump water. Since the O-Ring sits higher than the original does I wanted to make sure that it was necessary to have it in the pump.
6.) I reassembled the engine and kept the tight strap on the bottom and finally it pumped water into the engine.
My conclusion that you can reply to other buyers if they have a problem:
Do NOT underestimate 2 things....1.)the lack of ability of the pump to draw water up AND 2.)the fact that if the muff leaks it will NOT fill the cavity when common sense says it should. This was a 120hp Johnson. The engine bottom must be immersed fully or the muff must be very tight on the lower unit for the pump to function.
Please feel free to post this if you wish.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 12, 2024