awning shower tent Tuff Stuff Overland TS-SHOWER-TENT Shower Tent

awning shower tent Tuff Stuff Overland TS-SHOWER-TENT Shower TentMounted Shower Tent Enclosure by Tuff Stuff Privacy is one of the concerns to consider when having an outdoor adventure. Knowing where you will do routines on maintaining proper hygiene should always be well thought of. That's why Tuff Stuff came up with a Mounted Shower Tent Enclosure for you to use and attach to your roofrack. Having extra space to change or bathe is beneficial in overlanding. Aside from these advantages, this roof rack accessory

Mounted Shower Tent Enclosure - by Tuff Stuff

Privacy is one of the concerns to consider when having an outdoor adventure. Knowing where you will do routines on maintaining proper hygiene should always be well-thought of. That's why Tuff Stuff came up with a Mounted Shower Tent Enclosure for you to use and attach to your roofrack. Having extra space to change or bathe is beneficial in overlanding. Aside from these advantages, this roof rack accessory features:

• 12-square foot area where you can freely move around
• Easy setup within a couple of minutes
• Stake loops are added on the enclosure's base for added security
• Military green design and 300D Nylon Material with silver lining keeps privacy on point all the time

Two storage pouches are available for you to place your dry clothes on one and used garments on the other. This private enclosure for your rooftop tent can easily be installed. It will only take one to two minutes to set up this mounted shower tent enclosure. The weighted fiberglass rods ensure that the roof accessory stays in place when in use. Once done, the Tuff Stuff Mounted Shower Tent Bag can keep this pop-up enclosure using a 1000D PVC organizer, also included.

Free Shipping!

Product Specification

• Dimensions L/W/H: 42 X 42 X 76 Inches
• Material: 300D Nylon rip-stop with silver lining
• Mounting: Uses two qty L-brackets for installation to most crossbars
• Ground stakes, four qty
• Construction: All aluminum construction, black anodized
  
• Height: 76" of fabric, with 17-inch adjusting straps to lower the material to the ground
  
• Storage pouches, two qty
• Bracket and Velcro system used to secure a shower head or nozzle, two qty
  

Installation Video and Instructions

Instructions:

1. Use the shower tent L-brackets to attach to your designed mounting points. Ensure that the shower tent is secure and does not move when mounted.
2. Unzip the Shower tent cover. When traveling, make sure you check the zips are secure and if in rough weather, use a zip-tie to hold them together.
3. Move the shower cover out of the way by placing it on the top of the shower tent bracket. The body is attached to the frame and will not be removed.
4. There will be 4 Straps holding the shower tent and tent arms in place. Unbuckle the straps to deploy the tent.
5. Unroll the tent material away from the vehicle.
6. Stretch the material as far out as it will go (without forcing). There are tension bars on the bottom to help hold the material in shape.
7. Fold out the shower arms to be at 90 degrees from the shower bracket.
8. Lock each shower arm into place.
9. Use the loops at the base of the shower material and the provided stakes to secure the shower base to the ground.

Storage & Handling

• Open the Shower tent fully and brush and vacuum any dirt.
• Clean the fabric as needed using a mild detergent, warm water, and a soft to medium brush. Rinse cloth of all detergent before drying.
• The shower tent must be completely dry before storage, or mildew and mold may occur. This is especially necessary after camping in rain or wet conditions.
• Using a small brush, you can remove dirt from the zipper. You can use beeswax, soap, or silicon spray to keep the zipper lubricated.

Note: When putting the tent away, roll the material from the bottom to the top. This makes it much easier to fit back into the shower cover bag.