Pay in installments of $6.20 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 27 - Sep 1
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
gravel bike cockpit G01 Ultra-light Carbon Gravel Cockpit CYKLAn integrated carbon gravel handlebar engineered for the trails The G01 cockpit defines the steering standard for degraded surfaces. Engineered from a hybrid Toray T800 and T1000 carbon fiber matrix, this monocoque unit stands out with its flex curve architecture. This specific geometry acts as a controlled flex zone: it mechanically dissipates high frequencies and terrain impacts without the need for heavy inserts or moving parts. Palmar fatigue is
An integrated carbon gravel handlebar engineered for the trails
The G01 cockpit defines the steering standard for degraded surfaces. Engineered from a hybrid Toray T800 and T1000 carbon fiber matrix, this monocoque unit stands out with its flex-curve architecture. This specific geometry acts as a controlled flex zone: it mechanically dissipates high frequencies and terrain impacts without the need for heavy inserts or moving parts. Palmar fatigue is delayed, while power transfer remains direct.
The development of the G01 relies on hardware adaptability. Delivered with a steerer adapter, it seamlessly fits both OD2 (31.8 mm) and OD1 (28.6 mm) standards. Its internal architecture allows for completely invisible cable routing, yet remains backwards-compatible with semi-internal or external setups. A clean execution, designed for resilience.
Key features
Materials: Monocoque Toray T800 and T1000 carbon construction for maximum resistance to off-road stress (350 g in 420x80 mm).
Flex-curve structure: Top curve design (flex-curve) virtually increasing width to filter vibrations and relieve the carpal tunnel.
Gravel geometry: 16° flare widening the grip in the drops for absolute stability in technical descents (Reach 80 mm, Drop 125 mm).
Ultra-compatibility: Steering interface compatible with OD1 (1-1/8") and OD2 (1-1/4") steerer tubes via the included adapter.
Universal routing: Designed for full integration of hoses and cables, supporting semi-internal and external setups.
Compatibility
The G01 cockpit interfaces with OD2 (31.8 mm) and OD1 (28.6 mm) steering systems thanks to the included adapter shim. The routing system is designed to fit almost all modern gravel frames (mechanical and electronic drivetrains).
Note: This component is not compatible with Canyon's proprietary ecosystem (closed routing).
Tech specs
| Product ID | G01 |
|---|---|
| Structural material | Monocoque TORAY T800 / T1000 carbon |
| Finish | Matte black, glossy CYKL logo |
| Weight | 350 g (420x80 mm) |
| Discipline | Gravel, Allroad, Bikepacking |
| Handlebar widths | 380 / 400 / 420 / 440 mm (center-to-center at the hoods) |
| Stem lengths | 70 / 80 / 90 / 100 / 110 mm |
| Geometric specs | Angle: -7° | Reach: 80 mm | Drop: 125 mm | Flare: 16° |
| Steerer diameter | 31.8 mm (OD2) and 28.6 mm (OD1) with adapter |
| Cable routing | Fully internal, semi-internal, external |
| In the box | 1x G01 Cockpit, 1x OD1/OD2 Adapter, Spacer kit, 1x Bearing cover cup |
Videos
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 9 reviews
Sort
Product Reviews
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Versatile Room Divider With Easy Assembly and Strong Coverage
Size: 3 Panel 12FT W
I picked up this Siebwin 3-panel folding room divider mainly for privacy and room separation, and overall it works very well.
Assembly is very straightforward, and the divider can be set up, taken apart, and stored without much effort. The fabric quality feels good, and the frame construction is stronger and more stable than expected. The support tubes especially feel well built and help keep the divider standing securely.
One feature I really liked is the flexibility of the design. The panels can be used together as a complete divider or separated depending on the setup and available space. That makes it much more versatile for different room layouts or temporary privacy needs.
The coverage is also very good, and the size matches the manufacturer’s description accurately. The fabric blocks light and background visibility well enough to provide solid privacy without feeling overly heavy. The wider feet also help improve stability compared to thinner folding dividers.
Another positive detail is that everything arrived complete with no missing parts or damaged pieces, which made assembly much easier and faster.
Compared to cheaper privacy screens, this one feels more durable and easier to customize depending on the situation. In terms of value for the money, it feels like a very practical and worthwhile purchase considering the size, flexibility, and build quality.
Overall, a versatile and well-built room divider with easy assembly, strong privacy coverage, stable construction, complete included parts, flexible panel configuration, and excellent everyday functionality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Stable, flexible in deployment configuration, creates true privacy and looks great.
Size: 3 Panel 12FT W
This is the second room divider panel I have installed, and there are several features about this one that I like much better than my older one.
The fact that there are no gaps and that the material is thicker means you get more privacy or more hiding power, if you wish. My older divider has vertical spaces between each of the panels and the panels are half as wide as the Siebwin panels, so there are many vertical spaces. The Siebwin divider really creates privacy.
Another feature that I really appreciate is that the legs are wider and stand off from the floor. On my older one the legs are flat and they're rather awkward to adjust because they create more drag on the floor. The feet on the older one also loosen if you turn them counter clockwise, so adjustments of configuration that require the feet to be moved are more complex.
The older divider also must be deployed in a zig-zag fashion because he feet are not as wide, but this new one can be deployed and stable in a straight, an "N" shape or an arc. They are both the same length, but because the older one must be use in a zig-zag deployment it doesn't reach to the length of the new one.
The Siebwin divider definitely costs more at $103.48, but it sports several features and advantages over the other brand, so it does a better job and is worth the extra cost.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option.
There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk.
Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine.
The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two).
In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
recommand products
Thule Sitzauflage für Fahrradanhänger 'Chariot Seat Liner'
21.33
Flatbed™ Cargo Trailer
20.12
ROCKBROS TVI Damen Langarm-Radtrikot Fahrradbekleidung für MTB & Rennr – ROCKBROS-DE
25.98
Thule Chariot Sport 2 Double 1209,90€ – Princess
23.99
Thule Sitzauflage für Fahrradanhänger 'Chariot Seat Liner'
27.24