SKU: 74439230989
tent and stove

tent and stove X-stove XL Wood Stove (Stainless Steel) Portable Cooktop for Hot Tent – Wild Wild West USA

Sale price$19.90 Regular price$22.11
Save 10%

Pay in installments of $5.53 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 26 - Aug 31

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

tent and stove X-stove XL Wood Stove (Stainless Steel) Portable Cooktop for Hot Tent – Wild Wild West USAWho is this Stainless Steel Tent Stove for? This stainless steel tent stove is designed for car camping, hunting camp, winter camping, overlanding and survival kits. Those who prioritize function of heat, drying gear and cooking, without sacrificing function while camping in off grid locations. This wood stove is ideal for those who like to stay in the woods for an extended period, who need a portable, durable, and efficient renewable heat source.

 

Who is this Stainless Steel Tent Stove for?

This stainless steel tent stove is designed for car camping, hunting camp, winter camping, overlanding and survival kits. Those who prioritize function of heat, drying gear and cooking, without sacrificing function while camping in off grid locations. This wood stove is ideal for those who like to stay in the woods for an extended period, who need a portable, durable, and efficient renewable heat source.

  • Overlanding: Those that want a standalone off grid heat source and cooking surface.
  • Winter Camping: Those that are camping in remote locations, where you want a wood stove that you can fit large firewood pieces into.
  • Hunting Camp: Those that want to have a "Base Camp" style remote campsite, and utilize the ability to dry gear and cook real food.
  • Bushcraft, Survival Kits and Bugout Bags: Those that want a portable backup heat source and cooking surface to prepare real food and boil water. Especially important when things go south!

 

Tent Wood Stoves Specs

  • Max Net Weight:  33 lbs (side window adds half a pound) 15kg
  • Best for:  2-25 person tents
  • Kit Includes:  Wood Stove, 8 Pipes (flue), Spark Arrestor, Ash Grate, Viewing Window, Coal Rake and built in Damper and removable Baffle (heat output efficiency) 
  • Window: SCHOTT German Tempered Heat Resistant Glass
  • Material: 304 Stainless Steel
  • Firebox Size:  18.3" (length) x 10.6" (width) x 9.2" (height) 465mm x 270mm x 235mm
  • Fuel Source:  Firewood
  • Wood Pieces:  18" (length) 457mm
  • Stove Pipes:  8 x 16.9" (length) x 2.9" (width) 430mm x 75mm
  • Related: W-stove 3W Titanium Folding Stove
  • Use case:  Car camping, winter camping, horse packing, bushcraft, overlanding and survival kit

 

Why a Stainless Steel Wood Stove?

Stainless steel tent wood stoves are primarily used for camping near a vehicle, or as a backup heat and cooking source in a survival situation. The material used is very strong, durable and has heat efficient properties. XL size steel stoves can burn larger firewood pieces over titanium designs. This design is portable, and standalone freestanding (no tent needed). 

Need social proof? Check out the collection of videos of the X-stove XL Hot Tent Stove.  

 

 

Build for Elk Hunting Base Camps where dry heat matters

After a full day in rain, snow, freezing wind, in hyperthermic conditions is where a hot tent stove completely changes the game. Cook real food on the large stovetop. The X-stove XL Tent Stove larger firebox produces enough heat to dry clothes, warm the shelter, and get you back into the woods again more comfortably the next day.  

  • Dry clothes
  • Morale boost
  • Cook real food
  • Boil water
  • Wait out storms

 

Reliable Heat for Hot Tent Winter Camping

Winter camping changes completely once you can dry gear, warm the shelter, and maintain comfort long after sunset. The X-stove XL Tent Stove is designed for cold weather camping when you want use large firewood pieces, and heat a larger shelter. 

Whether you're camping in fresh snowfall, wet coastal conditions, or below freezing mountain temperatures, a heated shelter, cooking real food on the stovetop and the cozy ambiance of viewing a fire, make all the difference to stay in the mountains longer and more comfortably.

  • Dry gloves, socks and outer layers overnight
  • Create heat in your shelter
  • Boil water and cook real food
  • Remove single wall tent condensation
  • Watch storms out your tent door with fire

 

Heat, Cook and Live Comfortably Off Grid

A freestanding tent stove gives bushcraft campers and survival minded adventures a dependable heat source, when you want to add large firewood pieces to a standalone fireplace, without needing a tent.

The removable stovetop gives you the ability to cook on a grate like a wood-fired bbq, or keep the stovetop on to boil water, cook real food and have a renewable woodfired heat source.

  • Survival: Off grid emergency kits
  • Bushcraft camping: Great for heating large tents and preparing food.
  • Portable stovetop: Treat water by boiling, or add to freeze dried meals, or cook real food.

 

Heavy Rain just above Freezing in Camp

"When temperatures are just above freezing, high risk of hyperthermia, dependable dry heat changes everything. A base camp stainless steel stove gives you the ability to dry wet gear, cook real food in remote off grid campsites. 

For backpackers, hunters, bushcrafters and winter campers, it's not just about a wood stove making you more comfortable - it's about confidence to stay outdoors longer. Truly becoming the adventure fixture"

 

What makes this tent stove different?

The X-stove XL Hot Tent Wood Stove by Wild Wild West, is a portable lightweight and packable stove system comes with everything needed to heat a tent. Fits 2-25 Person sized canvas tents, teepees and hammock shelters. It burns camp firewood as fuel for heat and cooking on extra large sized stovetop. Kit includes a freestanding highest quality stainless steel stove, chimney flue pipes, spark arrestor, ash grate, viewing window, coal rake, built in removable baffle and damper. Perfect for those long cold winter camping nights!

Unique Wood Stove Features:

  • Removable stovetop for campfire and BBQ mode 
  • Stove Baffle (heat output efficiency) 

The X-stove XL firebox has a flat top surface, for boiling water and cooking real food with a pot or pan. Additionally, the top can be removed for an open fire pit.

This wood stove features removable and extendable legs, for customizing to your needs. The sections can be unscrewed for fine-tuning the height.

The foldable carrying handles, not only let you carry the stove, but they also fold out to let you dry, warming or store things.

The whole stove system stores by opening the door and putting all the parts inside. This makes it packable by hand, backpack, overlanding or where ever your adventure takes you!

 

Flat Stove Top Cooking

Being able to put a heavier pot or pan on the firebox top flat surface, is one of the biggest features of this wood stove. One of the best camping luxuries is making real food when you are outdoors.

The flat wood stove top can be used to boil water, place a small frying pan or pot, and even dry bake your favorite treat. The top can be removed as a standalone fire pit campfire, to cook on an open flame or add a (not included) grill.

 

Wood Stove Glass Door with Vent

The door on the X-stove XL was designed so that large pieces of wood can enter the firebox chamber easily. It has a sturdy handle, which you turn to lock the door closed. The sliding door air intake vent helps controls the burn rate of the wood. 

Additionally, part of the door is made of fireplace glass. We find this to be an amazing feature. The glass allows you to not only watch your fire for tent entertainment, but to see when your fire needs more wood. This also provides an incandescent night light in your tent.

 

Burns Wood and Handles Coals Efficiently

Each X-stove XL Tent Wood Stove comes with removable fire grate for more efficient wood burning. The grates allow for more air to get under the fire, which allows the wood to burn more evenly and efficiently. These two optional pieces can be added or removed as you chose. 

 

Adjustable Legs and Handle/Dry Rack

The X-stove XL Wood Stove has removable and adjustable legs which make for easy storage and packing.  We find this very beneficial for those who want to store, or pack the stove into smaller places.

Additionally, this stove comes with strong foldable handles, which will double as a wood stove drying and warming rack. The racks can be used to store cooking accessories, dry wet wood or even keep food warm.

 

Nesting Stove Pipe (Flue) Sections

The stackable stainless chimney pipe comes in eight sections, May have a total height of over 11 feet. They are designed so that each section will fit inside the fire chamber of the stove for easy storage. Each stove pipe is tapered, to make it easy to attach male and female ends and securely fit the pieces together. 

The Damper is bent at a 90 degree elbow and is used to fine-tune the burn rate of the fire wood inside of the stove. 

The unique removable baffle design makes the flame wrap around inside the firebox, before exiting into the damper section of the chimney pipe, which maximizes the heat output.

Note: Stove must be Burnt-in for the first time outside or in empty shelter. Use in an enclosed space at your own risk. Manufactured in South Korea. Wear gloves to assemble and operate this stove. 

Also known as the "X3 Tent Stove".  May have different small design tweaks than what is pictured.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 74439230989

Discover Niche Categories That Outsell tent and stove

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
H
Verified Purchase
hearmeout
Whiting, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Lake Worth, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Houston, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Waukegan, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
J
Verified Purchase
Joshua McPheron
Cuba, US
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy. It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything. OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026

recommand products